GARMIN CATALYST Driving Performance Optimizer ™ Owner’s Manual
© 2020 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Getting Started................................. 1 Installation....................................... 1 Installing the Magnetic Mount in Your Vehicle..................................................... 1 Connecting the Mount to Vehicle Power....................................................... 2 Bare Wire USB Cable........................... 2 Camera Mounting Considerations......... 3 Installing the Polarizing Filter on the Camera.....................................................
Cleaning the Outer Casing................ 28 Cleaning the Touchscreen................ 28 Cleaning the Camera Lens................ 28 Avoiding Theft................................... 29 Restarting the Device............................ 29 Removing the Device, Mount, and Suction Cup........................................... 29 Removing the Mount from the Suction Cup..................................................... 29 Removing the Suction Cup from the Windshield.........................................
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. This device is only intended for recreational use in a circuit environment. Never use this device on public roadways. Failure to follow this warning may result in an accident causing property damage, serious personal injury, or death. You are responsible for using this device in a safe and prudent manner.
Connecting the Mount to Vehicle Power 1 Plug the mini-USB end of the power cable into the mini-USB port on the powered mount. 2 Plug the power cable into the included vehicle power adapter . 3 Plug the vehicle power adapter into the power outlet in your vehicle. 4 If necessary, turn on the vehicle ignition switch to provide power to the power outlet in your vehicle.
Camera Mounting Considerations The first time you turn on your device, it provides information to help you mount the camera. The camera affixes to the windshield using the included adhesive mount. The adhesive mount is difficult to remove after it is installed. You should carefully consider the mounting location before you install the mount. • Do not mount the camera in a location that interferes with the driver's view of the road.
Installing the Polarizing Filter on the Camera The camera comes with a polarizing filter pre-installed over the lens to help reduce glare from your windshield. If you remove the polarizing filter, you can re-install it. NOTICE Do not rotate the lens cover while it is installed on the camera. 1 Position the filter so the line on the outer rim is facing up. 2 Place the filter firmly onto the camera lens. 3 Verify the line on the outer rim of the filter 4 is facing up and the Garmin logo is right side up.
Removing the Polarizing Filter from the Camera 1 Firmly grip the camera in one hand and the polarizing filter in the other hand. 2 Pull the filter away from the camera. Installing the Remote Cam on Your Windshield NOTICE The adhesive mount is intended for a long-term installation and can be difficult to remove. You should carefully consider the mounting location before you install the mount.
3 After you have selected a mounting location with a clear view, remove the protective film from the mount adhesive. 4 Position the mount over the mounting location. TIP: The adhesive is extremely sticky. Avoid touching the adhesive to the windshield until the mount is properly positioned. 5 Press the mount firmly onto the windshield, and maintain pressure for 30 seconds. This helps to ensure the mount adhesive has proper contact with the windshield.
Connecting the Camera Cable 1 Plug the camera cable into the micro-USB port on the camera. 2 Route the camera cable around your windshield so it does not obstruct your view of the track. The cable is designed to be routed out of sight. To hide the cable, route it behind the vehicle trim along the windshield, doorframe, or dash.
3 If necessary, use the included adhesive cable clips to secure the camera cable to the frame of your vehicle. 4 Connect the camera cable to the USB port on the magnetic mount. Connecting the Device to the Magnetic Mount The magnetic mount supplies power to the Garmin Catalyst™ device. Before you use your device on battery power, you should charge it. Place the back of the device onto the magnetic mount.
Installing the Screw-Down Ball Mount on the Dashboard Before you can attach the screw-down ball mount to your dashboard, you must select a suitable location on the dashboard and purchase the appropriate hardware for your mounting surface. WARNING It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and does not block your view of the road during the safe operation of your vehicle.
Device Overview 10 Device Overview
Microphone Volume control Power button Micro USB power and data port Auxiliary memory card slot (for additional memory) 3.5 mm audio jack Magnetic mount interface with 14-pin connector Speaker Memory card slot with pre-installed microSD card (under cover) ® Using the Touchscreen • • • • Tap the screen to select an item. Drag or swipe your finger across the screen to pan or scroll. Pinch two fingers together to zoom out. Spread two fingers apart to zoom in.
Home Screen 12 Status bar Select an icon to view more information. Race profile Select to configure your driver or car profile. Settings Select to change the device settings. DRIVE Select to start a drive session. REVIEW Select to review the details of your recent drive sessions. SYNC Select to synchronize data with your Garmin account. Weather information Displays the weather conditions at the closest track. TRACKS Select to view information about any track on the device.
Status Bar Icons The status bar is located at the top of the main menu. The status bar icons display information about features on the device. You can select some icons to change settings or view additional information. Camera storage. The timer shows the estimated recording time remaining on the memory card. Select to clear space on the memory card. Camera status. Select to align the camera. GPS signal status. Select to view location accuracy and acquired satellite information. Bluetooth technology status.
Catalyst App The Catalyst app allows you to view performance data from your Garmin Catalyst device, such as lap times, session summaries, and annual driving activity metrics. You can also view weather conditions for every session. The app provides customizable icons for your driver and vehicle profiles. You can download the Catalyst app from the app store on your mobile device. NOTE: The icons for your driver and vehicle profiles do not synchronize with your Garmin Catalyst device.
Pausing a Drive Session You can pause a drive session that is already in progress. When you pause a drive session, the device stops recording audio and video and stops recording some race data. This is useful if your vehicle breaks down on the track, or if you make a long pit stop. When you come to a stop, the device automatically prompts you to pause the drive session. 1 Stop the vehicle. 2 From the race timer, select an option: • When the device prompts you, select PAUSE.
Race Timer As you drive, the device keeps track of your progress and gives you audible coaching tips. The race timer keeps track of your lap number and shows your best lap times. LAST LAP Displays the last lap time during the current session. BEST LAP Displays the best lap time for the current session. DELTA Displays the time difference between the current lap and the best lap during the current session. END Select to end the current session. LAP Displays the current lap number.
Adding a Track You can add a track that is not already loaded on your device. The device uses your GPS location and your vehicle's movements to create a map of the track. 1 Select DRIVE > ADD A TRACK. 2 Follow the on-screen instructions to enter track details and information about your drive session. 3 Select START. 4 Start driving. Once you exit the pit area and enter the track, you must drive in a straight line for at least 0.5 seconds at a minimum of 55 mph (90 km/h), and complete one full lap.
Adding or Editing a Car Profile 1 From the home screen, select the race profile icon (Home Screen, page 12). 2 Select CAR. 3 Select an option: • To add a car profile, select ADD A CAR. • To edit a car profile, select . 4 Select a field to enter information about the make, model, and year of your vehicle. 5 Select DONE. Selecting a Car or Driver Profile 1 From the home screen, select the race profile icon (Home Screen, page 12). 2 Select an option: • To change the driver profile, select DRIVER.
Session Summary tics Track map Displays a map of the track. You can select a highlighted segment to view opportunities for that segment. Session summary statis Displays a summary of track conditions and performance metrics for the selected session. Session video thumbnail Select to view a video of the entire session. OPPORTUNITIES Select to view all opportunities for improvement for the selected session (Opportunities, page 21).
Comparing Sessions You can compare the results of two drive sessions. This can help you to see areas of improvement between two sessions. 1 From the session summary screen, select > Yes. 2 Select a session. Deleting Sessions You can delete drive sessions to clear space on your memory card. You cannot recover deleted drive sessions. From the session summary screen, select . Viewing Opportunities During a drive session, the device analyzes your performance and records opportunities for improvement.
Opportunities OVERVIEW Select to view an overview of the opportunity. BRAKING Select to view optimal brake timing and coaching advice for the selected track segment. APEX Select to view optimal track usage and coaching advice for the selected track segment. SPEED Select to view optimal speed and coaching advice for the selected track segment. Track segment map Displays an animated map of your performance on the selected track segment.
Adding Opportunity Information to the Race Coach You can add recorded opportunities to the race coach feature. The next time you approach the saved track segment, the device provides coaching information using your paired headset or car stereo. 1 From the session summary page, select OPPORTUNITIES. 2 Select an option: • To add all opportunities, select . NOTE: You must enable ADVANCED RACE COACH when you start the drive session to use this feature (Audible Prompt and Coaching Settings, page 15).
Laps tion POSITION Select to view a map of your track position during the lap. SPEED Select to view a map showing your speed at different points during the lap. ACCEL./DECEL. Select to view a map showing rates of acceleration or deceleration at different points during the lap. COMPARE Select to compare the selected lap with another lap. Track map Use the touchscreen controls (Using the Touchscreen, page 11) to adjust your view of the lap data.
Viewing Acceleration and Deceleration Data You can view a map of detailed acceleration data at different points during the lap. 1 From the session summary page, select LAPS. 2 Select a lap. 3 Select ACCEL./DECEL.. Comparing Laps You can compare any two laps from the same session. 1 From the session summary page, select LAPS. 2 Select a lap. 3 Select COMPARE. 4 Select a lap, and select OK. Settings Connecting to a Wireless Network 1 Select > Wi-Fi.
Sound and Notification Settings Select > Sound & Notification. Volume Sliders: Set the volume levels for audio features. Other sounds: Allows you to enable or disable sounds for other device interactions, such as screen touches, screen locking, or charging. Adjusting Sound and Notification Volume 1 Select > Sound & Notification. 2 Use the slider bars to adjust the sound and notification volume. Setting the Text Language You can select the language for text in the device software.
Specifications Operating temperature range From -20° to 55°C (from -4° to 131°F) Charging temperature range From 0° to 45°C (from 32° to 113°F) Radio frequency/protocol 2.4 GHz @ 19.5 dBm maximum Power input Vehicle power using the included vehicle power cable. AC power using an optional accessory (for home and office use only). Battery type Rechargeable lithium-ion Charging the Device NOTE: This Class III product shall be powered by an LPS power supply.
Updating Software with Garmin Express™ You can use the Garmin Express application to download and install the latest software updates for your device. 1 If you do not have the Garmin Express application installed on your computer, go to garmin.com/express and follow the on-screen instructions to install it (Installing Garmin Express, page 28). 2 Open the Garmin Express application. 3 Connect your device to your computer using a micro-USB cable.
Installing Garmin Express The Garmin Express application is available for Windows and Mac computers. 1 On your computer, go to garmin.com/express. 2 Select an option: • To view the system requirements and verify the Garmin Express application is compatible with your computer, select System Requirements. • To install on a Windows computer, select Download for Windows. • To install on a Mac computer, select Download for Mac.
Avoiding Theft • • • • Remove the device and mount from sight when not in use. Remove the residue left on the windshield by the suction cup. Do not keep your unit in the glove compartment. Register your device using the Garmin Express software (garmin.com/express). Restarting the Device You can restart your device if it stops functioning. Hold the power key for 10 seconds.
The device does not charge in my vehicle • Verify the vehicle is turned on and is supplying power to the power outlet. • Verify the interior temperature of the vehicle is within the charging temperature range indicated in the specifications. • In the vehicle fuse box, verify the fuse for the vehicle power outlet is not broken. My battery does not stay charged for very long • • • • • • • Decrease the screen brightness (Display Settings, page 24). Shorten the display timeout (Display Settings, page 24).
Replacing the Memory Card You can replace the memory card to increase the storage capacity or to replace a card that has reached the end of its useful life. The camera requires a microSD memory card from 32 to 256 GB with a speed rating of Class 10 or higher. You can replace the memory card from either of the two memory card slots located on the device (Device Overview, page 10). 1 To replace the memory card under the back panel, press on the two marked areas, and slide the back panel down to open it.
Connecting the Device to Your Computer You can connect the device to your computer using a USB cable. 1 Plug the small end of the USB cable into the port on the device. 2 Plug the larger end of the USB cable into a port on your computer. Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume. Transferring Data From Your Computer 1 Connect the device to your computer (Connecting the Device to Your Computer, page 32).
support.garmin.