User Manual

Entering the Crank Length with the Edge 530
The crank length is often printed on the crank arm.
1 Rotate the pedals a few times in order to activate the Rally system.
2 Select Menu > Settings > Sensors.
3 Select your sensor.
4 Select Sensor Details > Crank Length.
5 Enter the crank length, and select .
Edge 130 Instructions
Pairing Rally with the Edge 130
1 Bring the Edge device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other riders' sensors while pairing.
2 Hold .
3 Select Sensors > Add Sensor.
4 Rotate the pedals a few times in order to activate the Rally system.
5 Select your sensor.
You can customize a data field to display power data.
Entering the Crank Length with the Edge 130
The crank length is often printed on the crank arm.
1 Rotate the pedals a few times in order to activate the Rally system.
2 Hold .
3 Select Sensors.
4 Select your sensor.
5 Select Crank Length.
6 Enter the crank length, and select .
Forerunner
®
945 and fēnix
®
6 Series Instructions
Pairing Rally with the Forerunner 945 and fēnix 6 Series
1 Bring your compatible watch within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other riders' sensors while pairing.
2 Hold or MENU.
3 Select Settings > Sensors & Accessories > Add New > Power.
4 Rotate the pedals a few times in order to activate the Rally system.
5 Select your sensor.
After the sensor is paired with your device, the sensor status changes from Searching to Connected. You can
customize the data fields to display power data.
16 Other Compatible Devices