User Manual
Table Of Contents
- Table of Contents
- Introduction
- Training
- Ride Data
- Device Information
- Other Compatible Devices
- Appendix
Pedal Status LED
LED flashes indicate the pedal status, including issues that require your attention. Error codes are cleared after
the issue is resolved and you have synced your Rally system with the Garmin Connect app or your compatible
Garmin device. The LED is located on the inboard end of the spindle .
LED Activity Status
1 red flash The Rally system is active and working properly.
3 green flashes every 5 seconds The pedal is searching for the other paired pedal.
1 long green flash The left pedal is connected to the right pedal.
Alternating red and green flashes A software update or settings sync is in progress.
20 green flashes The software update or settings sync was successful.
20 red flashes
The software update or settings sync has failed.
The left pedal is unable to find the right pedal.
4 Introduction