Owner's Manual

Getting started
Garmin-Asus A10 Owner’s Manual 5
1. Plug the vehicle power cable ➊ into
the power connector on the side of
the cradle ➋ .
➋
➊
➌
➍
2. Remove the clear plastic from the
suction cup ➌ .
3. Clean and dry your windscreen
and the suction cup with a lint-free
cloth.
4. Place the suction cup on the
windscreen.
5. Flip the lever ➍ back towards the
windscreen.
6. Snap the cradle onto the suction
cup arm.
7. Fit the gold contacts on the left side
of the device into the cradle.
8. Tilt the device back until it snaps
into the cradle.
9. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
: To learn how to remove the
device from the mount, see page 113.

Complete the following optional tasks
to nish setting up your device:
• Set up voice mail (page 20).
• Set up an email account (page 57).
• Synchronise the device (page 90).