Cockpit Reference Guide

Garmin G1000H Cockpit Reference Guide for the AgustaWestland AW119Kx
190-01515-00 Rev. B
12
Com/Nav/Transponder
Flight
InstrumentsEIS
Com/Nav/
XPDRGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
The three navigation modes that can be cycled through are:
• VOR1 (or LOC1) – If NAV1 is selected, a green single line arrow (not shown)
labeled either VOR1 or LOC1 is displayed on the HSI.
• VOR2 (or LOC2) – If NAV2 is selected, a green double line arrow (shown) labeled
either VOR2 or LOC2 is displayed on the HSI.
• GPS – If GPS Mode is selected, a magenta single line arrow (not shown) appears
on the HSI and neither NAV radio is selected.
Selecting a NAV Radio for Navigation
Active
Fields
Standby
Fields
Tuning Box
The NAV Radio is Selected
by Pressing the
CDI
Softkey
NAV radios are selected for listening by switching the corresponding knob on the
remote Audio Panel to the “IN” position and by pressing the NAV VOL/ID Knob on
the PFD or MFD.
ENTER A TRANSPONDER CODE
1) Press the XPDR Softkey to display the transponder mode selection softkeys.
2) Press the CODE Softkey to display the transponder code selection softkeys,
for digit entry.
3) Press the digit softkeys to enter the code in the code field. When entering
the code, the next key in sequence must be pressed within 10 seconds, or
the entry is cancelled and restored to the previous code. Five seconds after
the fourth digit has been entered, the transponder code becomes active.