Cockpit Reference Guide

Garmin G1000H Cockpit Reference Guide for the AgustaWestland AW119Kx
190-01515-00 Rev. B
27
Flight Planning
Flight
Instruments EIS
Com/Nav/
XPDR GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Or:
If an existing flight plan is selected, an ‘Overwrite existing flight plan?
OK or CANCEL’ prompt is displayed. Press the ENT Key to choose to
overwrite the selected flight plan and see a list of the available flight
plans on the SD card. If overwriting the existing flight plan is not
desired, select ‘CANCEL’ using the FMS Knob, press the ENT Key, select
another existing or empty flight plan, and again press the IMPORT
Softkey.
7) Turn the small FMS Knob to highlight the desired flight plan for importing.
8) Press the ENT Key.
INSERT A WAYPOINT IN THE ACTIVE FLIGHT PLAN
1) Press the FPL Key to display the active flight plan.
2) If required, press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired flight plan waypoint. The
new waypoint is inserted before the highlighted waypoint.
4) Turn the small FMS Knob. The Waypoint Information Window is now
displayed.
5) Enter the new flight plan waypoint by one of the following:
a) Enter the user waypoint identifier, facility, or city.
b) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the ‘NRST’ airport
waypoints to the aircraft’s current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the ‘RECENT’
waypoints.