Cockpit Reference Guide

Garmin G1000H Cockpit Reference Guide for the AgustaWestland AW119Kx
190-01515-00 Rev. B
36
Procedures
Flight
InstrumentsEIS
Com/Nav/
XPDRGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
OperationAnnun/AlertsAppendixIndex
4) Turn the large FMS Knob to highlight the desired arrival.
5) Press the ENT Key. A list of transitions is displayed for the selected arrival.
6) Turn either FMS Knob to select the desired transition.
7) Press the ENT Key. A list of runways may be displayed for the selected
arrival.
8) Turn the large FMS Knob to highlight the desired runway.
9) Press the ENT Key.
10) With ‘LOAD?’ highlighted, press the ENT Key.
11) The arrival becomes part of the active flight plan.
12) If an altitude associated with a waypoint in an arrival procedure is to be
used to calculate vertical guidance perform the following steps:
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight the desired waypoint altitude.
c) Press the ENT Key to designate the altitude for use in giving vertical
guidance.
ACTIVATE AN ARRIVAL LEG
1) Press the FPL Key to display the active flight plan.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired waypoint within the
arrival.
4) Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
5) With ‘ACTIVATE’ highlighted, press the ENT Key.