Cockpit Reference Guide

Garmin G1000H Cockpit Reference Guide for the AgustaWestland AW119Kx
190-01515-00 Rev. B
11
Com/Nav/Transponder
Flight
Instruments EIS
Com/Nav/
XPDR GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
COM/NAV/TRANSPONDER
COM/NAV TUNING
1) Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.
Active
Fields
Standby
Fields
Tuning Box
Selecting a COM Radio for Transmit
SELECTING A NAV RADIO
A NAV radio is selected for navigation by pressing the CDI Softkey located on the
PFD. Pressing the CDI Softkey once selects NAV1 as the navigation radio. Pressing
the CDI Softkey a second time selects NAV2 as the navigation radio. Pressing the CDI
Softkey a third time activates GPS mode. Pressing the CDI Softkey again cycles back
to NAV1.
While cycling through the CDI Softkey selections, the NAV Tuning Box and the
Frequency Transfer Arrow are placed in the active NAV Frequency Field.