User manual

Go Alert
The go alert plays a tone and displays an alert when stopped traffic ahead of your vehicle starts moving again.
This alert appears only after the vehicle ahead has moved a substantial distance and your vehicle has remained
stopped. This can be useful at stop lights or in traffic delays. This feature uses the dash camera to detect the
stopped or moving vehicle and requires a clear view of the road.
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the consequences of using a red light or speed camera
database.
NOTE: This feature is not available for all regions or product models.
Information about red light and speed camera locations is available in some areas for some product models.
The device alerts you when you approach a reported speed or red light camera.
• You can use the Garmin Express
™
software (garmin.com/express) or the Garmin Drive app to update the
camera database stored on your device. You should update your device frequently to receive the most
up-to-date camera information.
Voice Control
The voice control feature allows you to control your camera by saying words and commands.
NOTE: The voice control feature is not available for all languages. You can use this feature while the interface is
set to an unsupported language, but you must speak the commands in English.
Controlling the Camera Using Voice Commands
1 Say OK, Garmin to activate the voice control feature.
The camera plays a tone and starts listening for a command.
2 Say a command:
• To save a video, say Save Video.
• To take a picture, say Take a Picture.
• To record audio with the video, say Record Audio.
• To record video without audio, say Stop Audio.
• To start Travelapse recording, say Start Travelapse.
• To stop Travelapse recording, say Stop Travelapse.
The camera plays a tone when it recognizes your command.
18 Voice Control