User manual

Can I use my Bluetooth sensor with my watch?
The device is compatible with some Bluetooth sensors. The first time you connect a sensor to your Garmin
device, you must pair the device and sensor. After they are paired, the device connects to the sensor
automatically when you start an activity and the sensor is active and within range.
1 Hold MENU.
2 Select Sensors & Accessories > Add New.
3 Select an option:
• Select Search All.
• Select your sensor type.
You can customize the optional data fields (Customizing the Data Screens, page37).
Restarting Your Watch
1 Hold LIGHT until the watch turns off.
2 Hold LIGHT to turn on the watch.
Resetting All Default Settings
You can reset all of the device settings to the factory default values.
1 Hold MENU.
2 Select System > Reset.
3 Select an option:
• To reset all of the device settings to the factory default values and save all user-entered information and
activity history, select Reset Default Settings.
• To delete all activities from the history, select Delete All Activities.
• To reset all distance and time totals, select Reset Totals.
• To reset all of the device settings to the factory default values and delete all user-entered information and
activity history, select Delete Data and Reset Settings.
NOTE: If you have set up a GarminPay wallet, this option deletes the wallet from your device.
Diving
Resetting Your Tissue Load
You can reset your current tissue load saved on the device. You should reset your tissue load only if you do not
plan to use the device again in the future. This can be useful for dive shops that provide devices for rent.
1 Hold MENU.
2 Select System > Reset > Reset Tissues.
Resetting the Surface Pressure
The device automatically determines the surface pressure using the barometric altimeter. Large pressure
changes, such as during a flight, can cause the device to automatically start a dive activity. You can reset the
surface pressure if the device automatically starts a dive activity incorrectly.
1 Hold LIGHT until the device turns off.
2 Hold LIGHT to turn on the device.
3 When the product logo appears, hold MENU until you are prompted to reset the surface pressure.
Troubleshooting 99