User manual

Viewing the Dive Log Glance
The glance displays summaries of your recently recorded dives.
1 From the watch face, press UP or DOWN to view the dive log glance.
2 Press START to view your most recent dive.
3 Press DOWN > START to view a different dive (optional).
4 Press START, and select an option:
• To view additional information about the activity, select All Stats.
• To view additional information about one of multiple apnea dives in the activity, select Dives, and select a
dive.
• To save a dive entry or exit location, select Save Location.
• To view a depth graph for the activity, select Depth Profile.
• To view a temperature graph for the activity, select Temperature Plot.
• To view the gases you used, select Gas Switches.
• To remove the activity from your device, select Delete.
Dive Planning
You can plan for future dives using your device. The device can calculate no-decompression limit (NDL) times or
create decompression plans. When planning a dive, the device uses your residual tissue load from recent dives
in the calculations.
Calculating NDL Time
You can calculate the no-decompression limit (NDL) time or maximum depth for a future dive. These
calculations are not saved or applied to your next dive.
1 Press START.
2 Select Plan Dive > Compute NDL.
3 Select an option:
• To calculate NDL based on your current tissue load, select Diving Now.
• To calculate NDL based on your tissue load at a future time, select Enter Surf. Interval, and enter your
surface interval time.
4 Enter an oxygen percentage.
5 Select an option:
• To calculate the NDL time, select Enter Depth, and enter the planned depth for your dive.
• To calculate the maximum depth, select Enter Time, and enter your planned dive time.
The NDL countdown clock, depth, and maximum operating depth (MOD) appear.
6 Press START.
7 Select an option:
• To exit, select Done.
• To add intervals to your dive, select Add Repeat Dive, and follow the on-screen instructions.
Diving 19