Operation Manual

17
The Map Page
high-level world coverage, as well as more detailed North
American coverage. You can add maps, data, imagery,
draw les, and more to your device to supplement the
base map. When you add different types of maps to
the same area, you can customize the order in which
the layers appear.
For more information about the types of data you can add
to your PN-Series GPS, see Detailed Map Data on
page 4.
To manage individual map packages that you have added
to your device, see Data Management.
Only the data types you have on your device show in the
Data Layering list. The default order for layering data is:
 GIS layers by name (XMap
®
only)
 Draw Layers
 Public Lands
 User Raster Data (XMap only)
 Custom Raster Data (XMap only)
 ImageReg (XMap only)
 Digital Globe 30cm (DG 30cm)
 High-resolution City Imagery (Hi-Res Cities)
 Digital Globe 60cm (DG 60cm)
 Digital Globe 1m (DG 1m)
 Color Aerial Imagery (Color DOQQ)
 Aerial Imagery (DOQQ)
 USGS Quads (3DTQ)
 Canadian 1:50K Topographic Sheets (Canadian 1:50K)
 NOAA Nautical Charts (NOAA Charts)
 Satellite Imagery (SAT10)
 XMap Topographic Data (XMap only)
 DeLorme Topographic Data (Topo North America 9.0)
 DeLorme World Base Map 7 (XMap only)
To layer data
Use the Data Layering option to select the types of data
you want to view on your PN-Series GPS and the order
in which you want data to display.
From the Map Page, go to MENU > Map Setup > Data
Layering to view a list of all the types of data you have
stored on your device's internal memory or on an SD card
in the device; this may include data that is not available for
the area you are viewing. When you highlight an item, the
full name of the data type shows in the box at the bottom
of the screen.
 To show a type of data, select the check box next to it.
 To hide a type of data, clear the check box next to it.
 To change the order in which data is layered, highlight
the item you want to move, then use the arrows on the
right side of the screen to move the item up or down
in the list. If two data types have identical zoom level
settings, the one higher in the list has precedence.
 To select/deselect all check boxes, go to MENU >
Select All or MENU > Deselect All.