Operation Manual

35
elevation is not available. When you press Mark, the
waypoint is saved and a waypoint details page opens
where you can edit the waypoint details. For more
information, see To edit waypoint details on page 36.
You can also mark waypoints using the on-screen Mark
option on Find search result details and route point
details pages.
When you mark a waypoint, the default waypoint symbol
is a red map pin and the label is "Wpt 001." When you
change the symbol or label, each new waypoint uses that
format until you change either the symbol or the name.
When you add multiple waypoints with the same name,
a sequential number is added to the name. For example,
if you name a waypoint “Campsite,” the second waypoint
is named “Campsite 002” and so on.
When you mark a waypoint from a details page, such as
a Find search result or a map object, the device uses the
information available for the symbol and name. If no
information is available, the red map pin is the
default symbol.
To mark a waypoint on the map
From the Map Page, press Mark to save the waypoint
to the current waypoint le. If a waypoint le is not open,
a new le opens and your are prompted to name and
save the le.
Once the waypoint is saved, the waypoint details
page opens. On the waypoint details page, you can do
the following:
 Edit the waypoint details.
 Delete the waypoint.
 View the waypoint on the map. To return to the
waypoint details page, press QUIT.
 Create a route to the waypoint.
For more information, see Managing Waypoints.
To mark a waypoint from a search result
or route point
On a Find search result details page or a route point details
page, select Mark on the screen. The result is saved as
a waypoint and the waypoint details page displays; you
can edit the information.
The Waypoints Page