User manual

1
Go for a ride.
2
Select > Set Elevation.
3
Enter the elevation, and select .
Temperature Readings
The device may display temperature readings that are higher
than the actual air temperature if the device is placed in direct
sunlight, held in your hand, or is charging with an external
battery pack. Also, the device will take some time to adjust to
significant changes in temperature.
Replacement O-rings
Replacement bands (O-rings) are available for the mounts.
NOTE: Use Ethylene Propylene Diene Monomer (EPDM)
replacement bands only. Go to http://buy.garmin.com, or contact
your Garmin dealer.
Getting More Information
• Go to support.garmin.com for additional manuals, articles,
and software updates.
• Go to buy.garmin.com, or contact your Garmin dealer for
information about optional accessories and replacement
parts.
Appendix
Data Fields
Some data fields require optional accessories to display data.
%FTP: The current power output as a percentage of functional
threshold power.
%Heart Rate Reserve: The percentage of heart rate reserve
(maximum heart rate minus resting heart rate).
%Max Heart Rate: The percentage of maximum heart rate.
10s Balance: The 10-second moving average of the left/right
power balance.
10s Power: The 10-second moving average of power output.
10s Watts/kg: The 10-second moving average of power output
in watts per kilogram.
30s Balance: The 30-second moving average of the left/right
power balance.
30s Power: The 30-second moving average of power output.
30s VAM: The 30-second moving average of the average
ascent velocity.
30s Watts/kg: The 30-second moving average of power output
in watts per kilogram.
3s Balance: The three-second moving average of the left/right
power balance.
3s Power: The 3-second moving average of power output.
3s Watts/kg: The 3-second moving average of power output in
watts per kilogram.
60s Flow: The 60-second moving average of the flow score.
60s Grit: The 60-second moving average of the grit score.
Aerobic Training Effect: The impact of the current activity on
your aerobic fitness level.
Anaerobic Training Effect: The impact of the current activity on
your anaerobic fitness level.
Asc. to Next Course Pt.: The remaining ascent to the next
point on the course.
Ascent Remaining: During a workout or course, the remaining
ascent when you are using an elevation target.
Assist Mode: The current eBike assistance mode.
Avg %HRR: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
activity.
Avg %Max Heart Rate: The average percentage of maximum
heart rate for the current activity.
Avg Balance: The average left/right power balance for the
current activity.
Avg Cadence: Cycling. The average cadence for the current
activity.
Avg Heart Rate: The average heart rate for the current activity.
Avg L. Peak Pwr Phase: The average power phase peak angle
for the left leg for the current activity.
Avg Lap Time: The average lap time for the current activity.
Avg Left Pwr Phase: The average power phase angle for the
left leg for the current activity.
Avg PCO: The average platform center offset for the current
activity.
Avg Power: The average power output for the current activity.
Avg R. Peak Pwr Phase: The average power phase peak angle
for the right leg for the current activity.
Avg Right Pwr Phase: The average power phase angle for the
right leg for the current activity.
Avg Speed: The average speed for the current activity.
Avg VAM: The average ascent velocity for the current activity.
Avg Watts/kg: The average power output in watts per kilogram.
Balance: The current left/right power balance.
Battery Level: The remaining battery power.
Battery Status: The remaining battery power of a bike light
accessory.
Beam Angle Status: The headlight beam mode.
Cadence: Cycling. The number of revolutions of the crank arm.
Your device must be connected to a cadence accessory for
this data to appear.
Cadence Bars: A bar graph showing your current, average, and
maximum cycling cadence values for the current activity.
Cadence Graph: A line graph showing your cycling cadence
values for the current activity.
Calories: The amount of total calories burned.
Calories to Go: During a workout, the remaining calories when
you are using a calorie target.
Course Pt. Distance: The remaining distance to the next point
on the course.
Destination Location: The last point on the route or course.
Di2 Battery Level: The remaining battery power of a Di2
sensor.
Di2 Shift Mode: The current shift mode of a Di2 sensor.
Distance: The distance traveled for the current track or activity.
Distance Ahead: The distance ahead or behind the Virtual
Partner.
Distance to Destination: The remaining distance to the final
destination. You must be navigating for this data to appear.
Distance to Go: During a workout or course, the remaining
distance when you are using a distance target.
Distance to Next: The remaining distance to the next waypoint
on the route. You must be navigating for this data to appear.
eBike Battery: The remaining battery power of an eBike.
Elapsed Time: The total time recorded. For example, if you start
the timer and run for 10 minutes, then stop the timer for 5
minutes, then start the timer and run for 20 minutes, your
elapsed time is 35 minutes.
24 Appendix