Owner's Manual

16 Edge 800 Owner’s Manual
ANT+ Sensors
1. Select  > > 
 > .
2. Select a bike.
3. Select  > .
4. Keep your power meter active by
pedaling until a message appears.

You can set seven custom power zones
using Garmin Connect. If you know
your functional threshold power (FTP)
value, you can enter it and allow the
Edge to calculate your power zones
automatically.
1. Select  > > 
 > .
2. Select a bike.
3. Select.
4. Enter your FTP value.
5. Select  > and select an
option:
• Select  to view and edit
the zones in watts.
• Select  to view and edit
the zones as a percentage of
your functional threshold power.


The non-zero data-averaging setting
is available if you are training with
an optional power meter. The default
setting is to exclude zero values that
occur when you are not pedaling.
To turn the non-zero averaging on
or off, select  > > 
 > >
>.