Edge 510 ® Owner’s Manual September 2013 190-01531-00_0B
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction.................................................................... 1 Getting Started ........................................................................... 1 Charging the Device .................................................................. 1 About the Battery .................................................................. 1 Installing the Standard Mount .................................................... 1 Installing the Out-Front Mount .........................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Always consult your physician before you begin or modify any exercise program. 2 Place the rubber disk À on the back of the bike mount. The rubber tabs align with the back of the bike mount so it stays in place. Getting Started When using your device the first time, you should complete these tasks to set up the device and learn about the basic features.
• • • • • • • 8 Press down slightly and turn the Edge clockwise until it locks into place. Select Select Select Select Select Select Select to save your changes and close the page. to close the page and return to the previous page. to return to the previous page. to return to the home screen. and to scroll. to view the connections page. to delete an item. Viewing the Connections Page The connections page displays the status of the satellite signals, ANT+ sensors, and your smartphone.
Training Going for a Ride Before you can record speed and distance, you must locate satellite signals (page 2) or pair your device with an optional ANT+ sensor. NOTE: History is recorded only while the timer is running. 1 From the home screen, select RIDE. 2 Wait while the device locates satellites. 3 Select to start the timer. Each time you reach the alert value, a message appears. The device also beeps if audible tones are turned on (page 11).
5 Select to save the step. Starting a Workout 1 From the home screen, select 2 Select a workout. 3 Select Do Workout. is saved to your device, you can follow the course or race against the course. > Workouts. After you begin a workout, the device displays each step of the workout, the target (if any), and current workout data. An audible alarm sounds when you are about to finish a workout step. A message appears, counting down the time or distance until a new step begins.
records include your fastest time over a standard distance, longest ride, and most ascent gained during a ride. Restoring Your Personal Records You can revert a personal record back to the previous saved record. 1 From the home screen, select > Personal Records. 2 Select . 3 Select a record, and select . NOTE: This does not delete any saved activities.
Both magnets must be aligned with their respective indication lines for the Edge to receive data. 1 Place the GSC 10 on the rear chain stay (on the side opposite the drive train). 2 If necessary, place the flat rubber pad À or the triangleshaped rubber pad between the GSC 10 and the chain stay for stability. The red LED blinks each time the pedal magnet passes the sensor. The green LED blinks each time the spoke magnet passes the sensor arm. NOTE: The LED blinks for the first 60 passes after a reset.
6 Follow the on-screen instructions. Sending Your Ride to Garmin Connect Pairing Your ANT+ Sensors NOTICE To prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer. Before you can pair, you must put on the heart rate monitor or install the sensor. Pairing is the connecting of ANT+ wireless sensors, for example, connecting a heart rate monitor with your Garmin device.
your smartphone and send them to your device so you can repeat them as a course or workout. Social media interactions: Allows you to post an update to your favorite social media website when you upload an activity to Garmin Connect. Weather updates: Sends real-time weather conditions and alerts to your device. Pairing an Edge with Your Smartphone You can pair the Edge with an Apple® or Android™ smartphone with the Garmin Connect Mobile application installed to use connected features.
Customizing Your Device • Select Auto Lap to set how laps are triggered (page 10). • Select Auto Scroll to customize the display of the training data pages when the timer is running (page 10). All changes you make are saved to the active profile. Profiles The Edge has several ways for you to customize the device including profiles. Profiles are a collection of settings that optimize your device based on how you are using it.
The Time - Elapsed data field displays the entire time including paused time. Marking Laps by Position You can use Auto Lap to automatically mark the lap at a specific position. This feature is helpful for comparing your performance over different parts of a ride (for example, a long climb or training sprints). During courses, use the By Position option to trigger laps at all of the lap positions saved in the course. 1 From the home screen, select > Activity Profiles. 2 Select a profile.
Changing the Units of Measure Water resistance You can customize units of measure for distance and speed, elevation, temperature, weight, position format, and time format. 1 Select > System > Units. 2 Select a measurement type. 3 Select a unit of measure for the setting. Water resistant to 98.4 ft. (30 m) NOTE: This product does not transmit heart rate data while swimming. Operating temperature range From 23° to 122°F (from -5° to 50°C) Radio frequency/ protocol 2.
3 While holding your finger on the touchscreen, turn on the device. 4 Select . Maximizing Battery Life 3 Wait 30 seconds. 4 Insert the new battery with the positive side facing up. NOTE: Do not damage or lose the O-ring gasket. 5 Replace the back cover and the four screws. After you replace the heart rate monitor battery, you must pair it with the device again. Replacing the GSC 10 Battery 1 Locate the circular battery cover À on the side of the GSC 10.
Updating the Software NOTE: Updating the software does not erase any of your data or settings. 1 Connect your device to a computer using the USB cable. 2 Go to www.garmin.com/products/webupdater. 3 Follow the on-screen instructions. Appendix Registering Your Device Help us better support you by completing our online registration today. • Go to http://my.garmin.com. • Keep the original sales receipt, or a photocopy, in a safe place.
Power - TSS: The Training Stress Score™ for the current activity. Power - Watts/kg: The amount of power output in watts per kilogram. Power Zone: The current range of power output (1 to 7) based on your FTP or custom settings. Reps to Go: During a workout, the remaining repetitions. Speed: The current rate of travel. Speed - Avg.: The average speed for the current activity. Speed - Lap: The average speed for the current lap. Speed - Last Lap: The average speed for the last completed lap.
Wheel Size L (mm) 650 × 38B 2105 700 × 18C 2070 700 × 19C 2080 700 × 20C 2086 700 × 23C 2096 700 × 25C 2105 700 × 28C 2136 700 × 30C 2170 700 × 32C 2155 700C Tubular 2130 700 × 35C 2168 700 × 38C 2180 700 × 40C 2200 Appendix 15
Index A accessories 5, 6, 12 alerts 3 altimeter, calibrating 10 ANT+ sensors 2 pairing 7 ANT+ sensors 5 applications 7 smartphone 8 Auto Lap 10 Auto Pause 9 auto scroll 10 B backlight 2, 10, 12 bands 11 battery charging 1 maximizing 12 replacing 11 type 1 Bluetooth technology 7–9 brightness 12 C cadence 6 alerts 3 calibrating power meter 6 touchscreen 12 calorie, alerts 3 charging the device 1 cleaning the device 11 computer, connecting 8 courses 4 deleting 4 editing 4 loading 4 customizing the device 9
www.garmin.com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 870 850 1242 1-866-429-9296 +43 (0) 820 220 230 +32 2 672 52 54 +45 4810 5050 +358 9 6937 9758 + 331 55 69 33 99 +49 (0)180 6 427646 + 39 02 36 699699 0800 - 023 3937 035 - 539 3727 + 47 815 69 555 00800 4412 454 +44 2380 662 915 + 35 1214 447 460 + 34 93 275 44 97 + 46 7744 52020 Garmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
