Quick Start Manual
Edge 800 Quick Start Manual 11
Before you can save your location, you
must locate satellite signals (page 5).
1. From the map, select .
2. Select the position icon .
The position icon
represents your
location on the map.
3. Select Save, or Save and Edit.
You can customize data elds for ve
timer pages, the map, and the elevation
page. For example, the instructions
show you how to customize the
workout timer page.
1. Select MENU > > Bike
Settings > Training Pages >
Timer Pages > Workout Timer.
2. Select Enabled.
3. Use + and - to select the number of
data elds you want to see on the
page.
4. Select .
5. Select a data eld to change it.
For a complete list of the available
data elds, see the Edge 800
Owner’s Manual.
You can customize the Edge to display
temperature in a data eld.
NOTE: The Edge may display
temperature readings that are higher
than the actual air temperature if the
Edge is placed in direct sunlight,
held in your hand, or is charging with
an external battery pack. Also, the
Edge will take some time to adjust to
signicant changes in temperature.