Quick Start Manual

6 eTrex10QuickStartManual


Waypoint averaging allows you to
increase the accuracy of a waypoint
location by collecting multiple samples
of the waypoint location.
1. Select .
2. Select a waypoint.
3. Move to the location.
4. Select .
5. When the Sample Condence status
bar reaches 100%, select .
For best results, collect four to
eight samples for the waypoint,
waiting at least 90 minutes between
samples.

You can use the Where To? menu to
nd a destination to navigate to. Not all
Where To? categories are available in
all areas and maps.

A route is a sequence of waypoints that
leads you to your nal destination.
1. Select   > 
 > .
2. Select a category.
3. Select the rst point in the route.
4. Select .
5. Repeat steps 2–4 until the route is
complete.
6. Select  to save the route.