User manual

Managing Maps
When you connect your watch to a Wi‑Fi network, you can download maps for additional regions. You can also
remove maps to increase the available device storage.
1 Hold MENU.
2 Select Map > Map Manager.
3 Select a map category.
4 Select an option:
• To download a map, select Add Map, select a map, press START, and select Download.
NOTE: To prevent battery drain, the watch queues the map download for later, and the download starts
when you connect the watch to an external power source.
• To remove a map, select a map, press START, and select Remove.
Map Themes
You can change the map theme to display data optimized for your activity type.
Hold MENU, and select Map > Map Theme.
None: Uses the preferences from the system map settings, with no additional theme applied.
Marine: Sets the map to display data in marine mode.
High Contrast: Sets the map to display data with higher contrast, for better visibility in challenging
environments.
Dark: Sets the map to display data with a dark background, for better visibility at night.
Popularity: Highlights the most popular roads or trails on the map.
Resort Ski: Sets the map to display the most relevant ski data at a glance.
Marine Map Settings
You can customize how the map appears in marine mode.
Hold MENU, and select Map > Marine.
Spot Soundings: Enables depth measurements on the chart.
Light Sectors: Shows and configures the appearance of light sectors on the chart.
Symbol Set: Sets the chart symbols in marine mode. The NOAA option displays the National Oceanic and
Atmospheric Administration chart symbols. The International option displays the International Association of
Lighthouse Authorities chart symbols.
Showing and Hiding Map Data
If you have multiple maps installed on your device, you can choose the map data to show on the map.
1 From the watch face, press START.
2 Select Map.
3 Hold MENU.
4 Select the map settings.
5 Select Map > Configure Maps.
6 Select a map to activate the toggle switch, which shows or hides the map data.
Map 73