Quick Start Manual

Forerunner610QuickStartManual 7
➋ ➋➌➍
3. Wrap the strap ➍ around your
chest, and connect the strap hook to
the loop.
: The Garmin logo should be
right-side up.
4. Bring the device within range (3 m)
of the heart rate monitor.
: If the heart rate data is erratic
or does not appear, you may have
to tighten the strap on your chest or
warm up for 5–10 minutes.
After you put on the heart rate monitor,
it is on standby and ready to send data.
When the heart rate monitor is paired, a
message appears, and appears solid
on the screen.
Going for a Run
Before you can record history, you
must locate satellite signals (page 6) or
pair your Forerunner with an optional
foot pod.
1. From the timer page, select 
to start the timer ➊ .
History is recorded only while the
timer is running. Your distance ➋
and lap pace ➌ appear on the timer
page.
➊
➌
➋
The data elds shown are the
defaults. You can customize data
elds (page 9).
2. After completing your run, select
.