Owner's manual

190-00590-00 Rev. C Garmin G1000 Pilot’s Guide for the Quest K odiak 1004-34
AUDIO PANEL AND CNS
PASSENGER ADDRESS (PA) SYSTEM
A passenger address system is available for delivering voice messages over the cabin speaker. When the PA
Key is selected on either Audio Panel, the COM MIC Annunciator on that side is extinguished, and the active
COM frequency on the associated PFD changes to white, indicating that there is no COM selected. A Push-to-
Talk (PTT) must be pressed to deliver PA announcements. The PA Annunciator flashes about once per second
while the PTT is depressed.
One of the pilots is free to use either COM radio while the other pilot delivers PA messages.
Figure 4-43 PA Key Selected for Cabin Announcements
PA Key is Selected on the
On-Side Audio Panel
CLEARANCE RECORDER AND PLAYER
NOTE: Pressing the play key on the pilot’s Audio Panel plays recorded audio to the Pilot. Pressing the play
key on the Copilot’s Audio Panel plays recorded audio to the Copilot.
The Audio Panel contains a digital clearance recorder that records up to 2.5 minutes of the selected COM
radio signal. Recorded COM audio is stored in separate memory blocks. Once 2.5 minutes of recording time
have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest
block.
The PLAY Key controls the play function. Pressing the PLAY Key once plays the latest recorded memory
block. The PLAY Annunciator flashes to indicate when play is in progress. The PLAY Annunciator turns off
after the present memory block has finished playing.
Pressing the
MKR/MUTE Key during play of a memory block stops play. If a COM input signal is detected
during play of a recorded memory block, play is halted.
Pressing the PLAY Key while audio is playing begins playing the previously recorded memory block. Each
subsequent press of the PLAY Key selects the previously recorded memory block.
Powering off the unit automatically clears all recorded blocks.
Figure 4-44 Play Key