Owner's manual

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
190-00590-00 Rev. C
GPS NAVIGATION
5-54
Selecting a nearest airport:
1) With the Nearest Airport Page displayed, press the FMS Knob to activate the cursor.
2) Turn the
FMS Knob to select the desired nearest airport.
Accessing information for a specific airport:
1) With the Nearest Airports Page displayed, press the APT Softkey or press the FMS Knob to place the cursor in
the ‘NEAREST AIRPORTS’ field. The first airport in the nearest airports list is highlighted.
2) Press the FMS Knob.
3) Highlight the desired airport.
4) Press the FMS Knob to remove the flashing cursor.
Accessing runway information for the selected airport:
1) With the Nearest Airports Page displayed, press the RNWY Softkey to place the cursor in the ‘RUNWAYS’ field.
2) Select the desired runway.
3) Press the FMS Knob to remove the flashing cursor.
Quickly tuning the COM transceiver to a nearby airport frequency:
1) With the Nearest Airports Page displayed, press the FREQ Softkey to place the cursor in the ‘FREQUENCIES’
field.
2) Turn either FMS Knob to select the desired frequency.
3) Press the E NT Key. The selected frequency is placed in the COM standby frequency tuning box.
4) Press the F REQUENCY TRANSFER Key to place the frequency in the active field.
5) Press the FMS Knob to remove the flashing cursor.
Accessing information for a specific airport:
1) With the Nearest Airports Page displayed, press the MENU Key.
2) Select the option ‘Select Airport Window’ and press the ENT Key. The cursor is placed in the ‘NEAREST AIRPORTS’
field.
3) Highlight the desired airport.
4) Press the FMS Knob to remove the flashing cursor.