Manual

GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. H
1-10
SECTION 1
INTRODUCTION
Page Groups
Page Groups
NAV Group WPT Group AUX Group NRST Group
see Section 3 see Section 7 see Section 10 see Section 8
Table 1-1 Page Groups
The bottom right corner of the screen (Figure 1-14)
indicates which page group (Table 1-1) is currently being
displayed, the number of pages available within that group
(indicated by square icons), and the placement of the
current page within that group (indicated by a highlighted
square icon).
In addition to the NAV Page Group, additional page groups
are available for waypoint information (WPT), auxiliary
(AUX) functions such as ight planning or unit settings, and
listings for nearest (NRST) airports or other facilities.
Figure 1-14 Current Page and Page Group
Current Page Group Number of Pages in
Current Page Group
Position of
Current Page
within Current
Page Group
Selecting the desired page group and page:
Turn the large right knob until a page from the
desired page group is displayed.
Turn the small right knob until the desired page
is displayed.
NAV Pages
There are ve pages available under the NAV Page
Group*:
• Default NAV Page
• Map Page
• TAWS Page
• NAV/COM Page
• Satellite Status Page
The Default NAV Page, the Map Page, and the NAV/
COM Page are used for most of the in-ight navigation.
Selecting the NAV Page Group and
displaying the Default NAV Page:
Press and hold the CLR Key.
Selecting the desired NAV Page:
Turn the small right knob until the desired
page is displayed.