GNX™ 120/130 Owner’s Manual March 2015 Printed in Taiwan 190-01846-00_0A
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product. Garmin and the Garmin logo are trademarks of Garmin Ltd.
Table of Contents Introduction.....................................................................1 Device Overview ......................................................................... 1 Unlocking the Controls ........................................................... 1 Profiles............................................................................ 1 Selecting a Profile ....................................................................... 1 Restoring Profiles to their Default Settings .......
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview NOTE: Certain functions are available only when the appropriate sensors are connected to the device. The marine instrument allows you to view data sources from sensors through a NMEA 2000 network.
Repeat steps 3 through 5 for each additional field you need to change. 7 Select DONE. Configuring the Data Fields Data provided on an instrument page can be shown in various ways depending upon the instrument page that is displayed. > CONFIGURE DATA FIELDS. 1 Select 2 Select a data field. 3 Select a configuration option. 4 Adjust the configuration. Filtering the Data Certain data types can be filtered to control how quickly the marine instrument responds to changes in the data (Data Type Information).
2 Select an option: • To turn off the beeper, select OFF. • To set the beeper to sound only when alarms are triggered, select ALARMS ONLY. • To set the beeper to sound when the keys are pressed and alarms are triggered, select ON (KEYS AND ALARMS). Configuring the Position Format NOTE: Do not change the position format or the map datum unless you are using a map or chart that specifies a different position format. > SETUP > SYSTEM > GPS POSITION.
NOTE: If you are unable to see the correct number of instruments listed, it may be caused by a combined network. A combined network must be resolved to control all connected devices with the keypad (Resolving a Combined Network). 3 Select the order of the device, and select OK. 4 Repeat steps 1 through 3 for each connected device. Setting up Keypad Presets Each of the four preset buttons on the keypad can be assigned to an instrument page.
RACE: The timer for vessel racing. REL: (RELATIVE HUMIDITY) Absolute, relative to another data field. For example, absolute humidity. RPM: (ENGINE RPM) Engine revolutions per minute from the tachometer. RUD: (RUDDER ANGLE) The rudder relative to another data field. For example, rudder angle. SEA: (SEA TEMP) The temperature of the water. Your device must be connected to a NMEA 0183 or NMEA 2000 device capable of acquiring the water temperature.
Data Field Category ENGINE VOLTAGE SYSTEM Available on a Available on a Single Function Two- or ThreePage? Function Page? Graph View Available?* Gauge View Available?** Data Filtering Available? SYSTEM AVERAGE SOG TRIP DISTANCE (Since power on) TRIP MAXIMUM SOG TRIP MAX BOAT SPEED TRIP ODOMETER TRIP TRIP DISTANCE TRIP TRIP FUEL USED TRIP RUDDER ANGLE VESSEL BOAT SPEED WATER DEPTH WATER DRIFT WATER SET WATER WATER TEMPERATURE WATER, TEMPERATURE AIR TEMPERATURE WEATHER, TEMP
Index A automatic scrolling 1 B beeper 2 D data 3 data fields 4 device, registration 4 display settings 3 H heading 2 type 2 I instruments 1 adding pages 1 configuration 2 removing pages 1 K keypad 3, 4 L locking 1 N NMEA 0183 4 P pages 1 position format 3 product registration 4 profiles 1 restoring 1 selecting 1 R race timer 2 registering the device 4 S settings 2, 3 system information 2 T timer 2 troubleshooting 3 U unlocking 1 Index 7
www.garmin.