Manual

C-7
To insert the GPS 95 into the yoke mount...
· Tilt the top of the GPS 95 into the yoke mount as shown.
· Engage the slot in the top of the GPS 95 into the raised bump in the
yoke mount bracket.
· Rotate the bottom of the GPS 95 into the yoke mount until the unit
latches securely into place.
· Connect the antenna or antenna cable. No other electrical connections
are required; all power and data connections are made through the 6-
pin connector mounted in the yoke mount bracket.
To remove the GPS 95 from the yoke mount...
· Disconnect the antenna or antenna cable.