Manual

8-18

To perform a trip and fuel plan for a route...

· Highlight the first cyclic field (top

left) and select “RTE” with CLR.

· Highlight the next cyclic field and

select the desired route number by

pressing CLR.

· Highlight the “Leg>” field and select

the desired leg, or select “All” for the

entire route, using CLR.

· Highlight the “SPD:” field and enter the planned speed, followed by

ENT.

· Highlight the “Flow:” field and enter the estimated fuel flow followed by

ENT.

· The GPS 95 will now display the calculated figures.

NOTE: When “all” is selected, no desired track (DTK) will be shown since

this value only applies to an individual leg.

8.17 VERTICAL NAVIGATION PLANNING