Manual

9-9
RTE
*Plus RTE softkey, if
needed
CLR
JKL
4
PQR
6
To create the sample route...
Press RTE and the RTE softkey, if
needed, to select the Route Definition
Page.
Press the right arrow to place the
cursor on the route number field.
Press CLR to select route 1. Notice
that the route is empty; it does not
contain any waypoints. (If route 1 is
not empty, select a different route.)
Press the right arrow key twice to
place the cursor on the first waypoint
identifier field.
Enter the identifier for St. Petersburg
(KPIE). Begin by pressing the “4” key
to select the letter “K”.
Press the “6” key, followed by the left
arrow key, to select the letter “P”.