user manual

Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
1-6
SECTION 1
SYSTEM OVERVIEW
BRG2 (bearing) – Press to cycle through the
following Nav sources, making the pointer the
indicator for the corresponding source and
displaying the the appropriate information.
NAV2 – Displays NAV2 waypoint frequency or
identifier and DME information in the BRG2
Information Window.
GPS – Displays GPS waypoint identifier and GPS
distance information in the BRG2 Information
Window.
ADF – Displays ADF waypoint frequency in
the BRG2 Information Window.
OFF – Removes the BRG2 Information
Window.
STD BARO – Press to set the barometric pressure to
29.92 inches of mercury (1013 hPa by pressing
the METRIC Softkey).
BACK – Press to return to the previous level
softkeys.
ALERTS – Press to display the Alerts Window.
NRST
OBS
TMR/REF
IDENT
ALERTS
XPDR
STBY
ON
BACK
VFR
ALT
CODE
IDENT
0
1
6
3
2
4
5
7
IDENT
BACK
BKSP
Press the BACK softkey
to return to the top level
softkeys
Press the BACK
softkey
to return to
the top level
softkey
s
ALERTS
ALERTS
ADF/DME
(optional)
CDI
CDI (VOR1)
CDI (VOR2)
GPS
Figure 1-5 PFD Softkey Flow Chart – 3
OBS – Press to select OBS Mode on the CDI when
navigating by GPS (only available with active leg).
CDI – Press to change navigation mode on the CDI
between GPS, VOR1, and VOR2.
ADF/DME (optional) – Press to display the ADF/DME
Tuning Window.
XPDR – Press to display the transponder mode
selection softkeys.
STBY – Press to select Standby Mode.
ON – Press to select Mode A.
ALT – Press to select Altitude Reporting Mode.
VFR – Press to automatically squawk 1200 (only
in the U.S.A., refer to ICAO standards for VFR
codes in other countries).
CODE – Press to display transponder code selection
softkeys 0-7.
0 through 7 – Press numbers to enter code.
IDENT – Press to provide special aircraft
position identification to Air Traffic Control
(ATC).