GPS 76 owner’s manual & reference guide covers.
©2001 GARMIN Corporation GARMIN International, Inc. 1200 East 151st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax 913/397.8282 GARMIN (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ, U.K. Tel. 44/1794.519944 Fax 44/1794.519222GARMIN Corporation No. 68, Jangshu 2nd Road., Shijr, Taipei County, Taiwan Tel. 886/2.2642.8999 Fax 886/2.2642.9099 All rights reserved.
Registration GPS 76 Registration Introduction Help us better support you by completing your on-line registration today! Registration Why should you register your GPS 76? • Notification of Product Updates • Notification of New Products • Lost or Stolen Unit Tracking Connect to our website (www.garmin.com) and look for the Product Registration link on the home page. Thanks for choosing the GARMIN GPS 76.
WARNING: If you choose to use the GPS 76 in a vehicle, it is the sole responsibility of the owner/operator of the GPS 76 to secure the GPS unit so that it will not cause damage or personal injury in the event of an accident. Do not mount the GPS 76 over airbag panels or in a place where the driver or passengers are likely to have an impact with it in an accident or collision.
NOTE: This device complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE (“home or office” interference requirements are more stringent than “outdoor” requirements). Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The GPS 76 is a 7.5 ounce, 12 channel, hand held GPS receiver with a built-in Quad Helix antenna. The GPS 76 has nine keys located on the front of the unit, that allow the user to quickly access all of the units functions. The GPS 76 has a large 180 X 240 pixel, 4 level gray monochrome display for easy viewing. Introduction The GPS 76 is a full function GPS with a factory-loaded Marine point database. Using MapSource™, you can choose to have the GPS 76 display a variety of Points of Interest.
Introduction....................................1-7 Main Menu Page.......................... 35-61 Trip Computer....................... 35-36 Registration ........................................ 1 Tracks.................................... 37-38 Warnings and Cautions ...................... 2 Waypoints .................................. 39 FCC Compliance Statement ............... 3 Creating Waypoints .................... 40 Features.............................................. 4 Editing Waypoints .........
TO DO THIS: SEE PAGE(S): Turn the unit on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 12 Initialize the GPS receiver (first time use) . . . . . . . . . . . . . . . . . . . . . 18, 21-22 Adjust screen contrast or backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Enter data and select options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15 Learn how to operate the unit’s function keys. . . . . . . . . . . . . . . . . . .
Introduction Internal Antenna GPS 76 Unit Features External Antenna Connection Battery Compartment Interface Keys External Data/Auxilary Power Port 180 x 240 Four Level Gray, Backlight Display 7 190-00229-00.
Getting Started Turn D-ring 1/4 turn counterclockwise and remove cover Installing the Batteries Please dispose of used batteries properly! Please dispose of used batteries properly! Remove the batteries from your GPS 76 if you don’t expect to use it for several months. Be sure to observe the proper polarity when inserting the batteries. Follow the battery manufacturer’s instructions on the proper care and handling of the batteries. Installing the batteries Installing the batteries: 1.
Getting Started Installing the Lanyard To install the Lanyard: 1. Place the loop of the Lanyard through the slot opening at the bottom of the GPS 76. 2. Route the strap through the loop and pull tight. 9 190-00229-00.
IN — The Zoom IN Key is used to decrease the map scale. When you decrease the map scale, you will view a smaller area on the map with greater detail. OUT — The Zoom OUT Key is used to increase the map scale. When you increase the map scale, you will view a larger area on the map with less detail. Getting Started Interface Keys NAV / MOB — The NAV Key is used to begin or stop navigation.
This exercise will provide you with the knowledge and skill to navigate the pages and menus of your GPS 76 with confidence. As we progress through this Owner’s Manual you will often be directed to press a specified Interface Key or highlight a field. When you are directed to press a Key, you should press, then release the Key. If the Key needs to be held down for a period of time, the instruction will tell you. The position of the highlight is controlled by the ROCKER Key.
While learning the basic operation of the GPS 76, let’s put the unit into Simulator Mode. The Simulator Mode is great for practicing with the unit while inside and satellite signals are not available. When the GPS 76 is in Simulator Mode, the GPS receiver is turned off (this will help conserve battery power) and the unit cannot be used for actual navigation. Getting Started Using the Built-in Simulator I NOTE: Do not try to navigate using the Simulator Mode.
The Interface Keys are your link with the GPS 76. Let’s take a few minutes and see what some of the Interface Keys are used for. With the GPS Information Page displayed, press the PAGE Key several times. Notice that each time you press the PAGE Key the next main page will be displayed. Do the same with the QUIT Key. Notice the QUIT Key acts the same as the PAGE Key except the pages are displayed in a reverse sequence. Press the PAGE Key until the Map Page is displayed.
There will be many times that you may need to enter data. An example is naming a waypoint. The ROCKER Key is used to navigate through menu items and to enter data. Getting Started Let’s combine a couple of lessons. We will create a new waypoint, enter a waypoint name, and assign a symbol to the waypoint. Entering Data Symbol Field The term ‘Waypoint’ may be new to you. You will find the term Waypoint is used frequently when talking about navigation. A Waypoint is a position stored in the unit’s memory.
Changing the name: 1. Press the ROCKER Key right to highlight the Name Field then press the ENTER Key. Getting Started The Name Field will become active and the first zero will be highlighted. Notice that there are now ten placeholders for alpha-numeric characters displayed. 1. Press the ROCKER Key to the left to clear the field. Entering Data 2. Press the ROCKER Key up, scroll through the alpha-numeric list until the letter ‘C’ is selected. 3. Press the ROCKER Key right to move to the next placeholder.
You should now have enough knowledge to navigate through the main pages, Option Menus and enter data into your GPS 76. Now let’s learn how to navigate! Getting Started The main use of a GPS is to be able to navigate to a known position. We have already created a waypoint and named it CREEK. Let’s create another waypoint on the Map Page using a different method, the Map Pointer. Basic Navigation Press the PAGE Key until the Map Page is displayed.
Going to a waypoint: 1. Press the NAV Key. 2. Highlight ‘Go To Point’ then press the ENTER Key. 3. Highlight ‘Waypoints’ then press the ENTER Key. 4. Highlight ‘MAP 1’ then press the ENTER Key. 5. Highlight the ‘Goto’ Button then press the ENTER Key. The GPS 76 is now navigating to the waypoint MAP 1. For a GPS to navigate, it has to be moving, and fortunately you can simulate movement in the GPS 76. Press the PAGE Key until the Pointer Page is displayed.
Press the ROCKER Key to the left simulating a left turn, until the Pointer is realigned with the vertical line in the Compass Ring. You are now headed toward the waypoint. Getting Started Now that we have now gone through the basic operation of the unit using the simulator, it is time to do some actual navigation! Initializing the GPS 76 To turn off the simulator: 1. With the GPS Information Page displayed, press the MENU Key. 2. Select ‘Stop Simulator’ then press the ENTER Key.
Before we take off walking lets clear the Track Log. The Track Log is the bread crumb trail left on the Map Page and Highway Page. To clear the Track Log: 1 Press the MENU Key twice to display the Main Menu. 2. Highlight Tracks then press the ENTER Key. 3. Highlight the ‘Clear’ Button then press the ENTER Key. 4. Highlight the ‘Yes’ Button then press the ENTER Key. Getting Started Basic Navigation DESTINATION 5. Press the PAGE Key until the Map Page is displayed.
As you start walking, you will see that the Pointer is pointed at your destination. As soon as you are able, turn toward the Pointer until it is aligned with the vertical line in the Compass Ring. As you continue walking, and approach your HOME waypoint, a message will be displayed alerting you that you have arrived. Getting Started Congratulations, you should have enough basic knowledge of your GPS 76 to begin navigating on your own.
The Reference Section of this manual will describe the Main Display Pages and their options in detail. The Getting Started section described the process of navigating the Main Display Pages and the Option Menus. While this section will provide some direction on how to select an item, its main intention is to describe each Main Page and it’s Option Menu in detail.
Initialization Options Getting Reference Started Initializing the GPS Receiver If the GPS 76 is unable to determine its location, an options menu will be displayed. Depending on the situation, select an option to help the unit acquire satellites. To select an option, place the highlight over the option then press ENTER. Start Simulator — The Simulator can be used when you are indoors and the GPS is unable to locate satellites.
GPS Information Page The GPS Information Page displays your speed, elevation, the estimated accuracy, receiver status, satellite locations, satellite signal strength, the date, time and the GPS receiver’s current location. Getting Reference Started Speed, Elevation and Estimated Accuracy When the GPS is receiving at least three satellite signals, it will provide you with the current GPS Speed and the estimated Accuracy of the GPS Location.
Satellite Location The location of each available satellite is displayed over two location rings. The outer ring represents the horizon, the inner ring represents 45° above the horizon and the center represents directly overhead. When the unit is using a satellite for navigation, the satellite number will become highlighted on the location rings. The unit can be set to display satellite location with North, or your current track toward the top of the display.
GPS Information Page Options Menu To activate the Options Menu from the GPS Information Page, press the MENU Key. To select an option, highlight the desired selection then press ENTER. Start/Stop Simulator — This option is used to Start or Stop the Simulator. Getting Reference Started GPS Information Page Track Up/North Up — This option determines if the satellites are displayed with the rings oriented with North toward the top of the display or your current track toward the top of the display.
Map Page The GPS 76 comes with a factory-loaded marine point database that includes marine navaids and major cities. This can be replaced with marine navaids, cities, and points of interest using GARMIN MapSource products. Getting Reference Started Changing the Zoom Scale Map Page You can change the Zoom Scale on the Map Page allowing you to either view a smaller area in greater detail or a larger area with less detail.
Setup Page Layout — This option allows you to select the number of data fields rows and the size of text used in the fields. You have the option of displaying Small (1 Row), Small (2 Rows), Small (3 Rows), Medium (1 Row), Medium (2 Rows), Medium (3 Rows), Large (1 Row), or Large (2 Rows). To select an option, highlight the desired selection then press ENTER. The new configuration will be displayed on the map.
If you select ‘Off’, the items for that option will not be displayed on the Map Page. If you select ‘Auto’, the GPS 76 will automatically determine the zoom level at which to display the selected items. If you select a scale setting, the items will be displayed on the map only when the Map Zoom Scale is at or less than the selected scale .
Setup Map — ‘Map’ Tab The ‘Map’ Tab contains settings for the Basemap, MapSource, Lat Lon Grids, and Grid Labels. To change a setting, highlight the appropriate field then press ENTER. Make your new selection then press ENTER to accept the selection. MapSource — This option allows you to turn map data displayed on the Getting Reference Started Map Page Options map ‘On’ or ‘Off’. This setting controls factory-loaded data as well as any MapSource data that may be loaded in the unit.
Active Route Waypoint — This option sets the display parameters for waypoints that are in an Active Route. As an example, if you have selected ‘Small’ as the text option for all waypoints, but selected ‘Large’ as the setting for Active Route Waypoints, the waypoints included in an Active Route will be displayed with large text on the Map Page. Getting Reference Started Map Page Options Setup Map — ‘Point’ Tab The ‘Point’ Tab contains the Navaids, Points of Interest, and Geo option settings.
Saved Tracks — are Track Logs that have been saved in the units memory. Course Lines — controls the display of the Route Line and Go To Line. Bearing Line — The Bearing Line will show the bearing from your current location to the active waypoint. This can be used to steer the shortest path to your waypoint. Getting Reference Started Map Page Options Setup Map — ‘City’ Tab The ‘City’ Tab contains the ‘Text’ and ‘Zoom’ settings for Large City, Medium City, Small City and Small Towns.
Pointer Page The Pointer Page is best used for navigation when a straight line course can not be followed. The Pointer Page has User Selectable Data Fields along the top, a Active Waypoint Field, Compass Ring and a Pointer. Getting Reference Started Pointer Page User Data Fields Waypoint Name Vertical Line Pointer The Compass Ring is a graphic display of your current track. As you change direction, the Compass Ring will rotate, aligning your track with the vertical line.
Highway Page The Highway Page is best used for navigation when a straight line course can be followed. The Highway Page has User Selectable Data Fields along the top, a Status Bar, and the Highway Display. The Highway Page shares many features with the Map Page. Any tracks, saved tracks or waypoints that are within the display area will be shown, the Zoom Level can be changed using the IN and OUT Keys, and the Triangle represents your current location. To navigate using the Highway, just follow the road.
Change Data Fields — This option allow you to select the type of data you want displayed in the data fields. To change a data type, place the highlight over the desired data field, then press ENTER. Using the ROCKER, scroll through the available selections. With the data type highlighted, press ENTER to accept the selection. Getting Reference Started Highway Page Setup Highway — This option contains the Highway Setup features.
Next — This setting determines if the next waypoint in a Route will be displayed. If ‘On’ is selected, you will see the next waypoint in the Route. If ‘On’ is selected and the Route option is set to ‘Off’, only the Next Waypoint in the Route will be displayed. Route — This setting determines if the waypoints in a Route will be displayed. If this selection is set to ‘Off’, Route Waypoints will not be on the Graphic Highway.
Moving Avg — The Moving Average (Speed) field will display an average speed based on the time the unit was in motion since the Trip Computer was last reset. Getting Reference Started Moving Time — The Moving Time field will display the total time the unit was in motion since the Trip Computer was last reset. Main Menu Trip Computer Overall Avg — The Overall Average (Speed) field will display the average speed of the unit since the Trip Computer was last reset.
Tracks The Tracks Page displays the amount of Track Memory used, will allow you to ‘Save’ or ‘Clear’ the current Track Log, and displays a list of any Saved Tracks. Getting Reference Started Save — When you select ‘Save’ you can choose how far back in the log you wish to save. Select the appropriate choice, press ENTER to save the selection. Main Menu Tracks Clear — The ‘Clear’ Button will allow you to clear the Track Log.
Track Information Page To access information on a Saved Track, highlight the desired track then press ENTER. This will display the Track Information Page. Getting Reference Started The Track Information Page contains data fields for the Name, Distance, and Points. There are four Option Buttons along the bottom of the page. Main Menu Tracks Name — this field will allow you to change the Saved Track Name. When tracks are saved the GPS 76 will use a date as the default track name.
Waypoints When ‘Waypoints’ is selected, a user waypoint list will displayed. This list can be displayed as ‘Waypoints by Name’, or by ‘Nearest Waypoints’. With the waypoint list displayed, pressing the MENU Key will display an Options Menu. Waypoint Options Menu Find By Name / Find Nearest — This option allows you to select how the Getting Reference Started Main Menu Points Page Waypoint List will be displayed. Find Nearest — will display a list containing the nearest waypoints within a 100 mile radius.
Creating Waypoints There are three methods for creating waypoints in the GPS 76. You can press the ENTER/MARK key while at a location, you can create a waypoint on the Map Page, or you can enter coordinates for a waypoint manually. Getting Reference Started Creating Waypoints Creating a waypoint using the ENTER/MARK Key — When at a location that you want to save, press and hold ENTER/MARK until the Mark Waypoint Page is displayed.
Editing Waypoints You can edit waypoints when they are created or after they have been saved to memory. There are six items that can be changed, the symbol, name, location, elevation, depth, you can choose whether or not to show the waypoint name on the Map Page. Getting Reference Started Editing Waypoints To edit a saved waypoint — Press the MENU Key twice to display the Main Menu. Highlight ‘Points’ and press ENTER, then highlight ‘Waypoints’ and press ENTER again.
Points of Interest Will only be available when MapSource CD data that contains Points of Interest information is loaded in the unit. When ‘Points of Interest’ is selected, the Points of Interest Selection Page is displayed. To select a Points of Interest item, highlight the desired selection then press ENTER. Getting Reference Started Main Menu Points Page After an item is selected, either a list or selection menu will be displayed.
the city from your current location. To save the city as a waypoint, press MENU, with ‘Save as Waypoint’ selected press ENTER. Along the bottom of the Information Page are three buttons, ‘GoTo’, ‘Map’ and ‘OK’. ‘GoTo’ begins direct navigation to the point, ‘Map’ displays the city on the Map Page and ‘OK’ returns the display to the Cities List. Routes Getting Reference Started Main Menu Routes A Route is a series of waypoints used for point to point navigation.
Create Route Options Use Map — This displays the Map Page with the Map Pointer active. You can now point at any location or point on the map, and enter it into the route. Getting Reference Started When using the Map to create a route, you can select an existing User Waypoint/Map Feature, or you can create a ‘New’ Waypoint. New Waypoints are created if you place the Map Pointer on a location that is not a Map Feature.
Naming the Route — the GPS 76 will automatically name the route using the first and last waypoint names as a reference. To change the Route Name, place the highlight over the Name field then press ENTER. When you have finished, press ENTER to save the new name. Editing a Route To edit a route the unit must be on the Route Page. When editing a route you can Insert a Waypoint, Remove a Waypoint, Reverse the Route, Delete the Route or choose to edit the route on the Map Page.
2. Place the Map Pointer over a location that is not a Map Feature then press ENTER. The New Waypoint Page will be displayed. Press ENTER to save the new waypoint. Place the Map Pointer over the route leg that you want to insert the waypoint into, then press ENTER. Getting Reference Started ‘Remove’ a Point or Waypoint — To remove a point or waypoint from the route, Main Menu Routes place the Map Pointer over the point or waypoint that you want to remove, then press ENTER to display an options menu.
Plan Route — To plan a route, enter a Speed, Fuel Flow, Depart Time and Depart Date. Fuel Flow is measured in “units per hour”. It may be necessary to consult your vehicle’s Owner’s Manual for performance specifications. The Active Route Page and Route Page display trip-planning information for each leg or the entire route. The information includes Course, ETA, Fuel to point, Leg Fuel, Leg Time, Sunrise & Sunset at point location, Time to Point and Leg Distance.
Celestial The Celestial Menu lets you view information for Tides, Sun and Moon, or Hunt and Fish. Getting Reference Started Main Menu Celestial Date Local Time Max Level Current Tide Level Low Tide Curve Min Level Main Menu — Celestial Station Name Current Time Day Night MLLW Station Time Event Times Tides — Displays a graphical chart which displays tide station information in a 24 hour span starting at midnight station time.
The top of the page will display the date with the tide station below. The top of the chart will show a 24-hour block of local time (LCL) for your position, with the reported station time (STA) appearing at the bottom. Daylight (light bar) and night (dark bar) will show across the time scale, with the time progressing from left to right. (Local time scales and sunrise/sunset info may not be available for a few stations).
Sun and Moon — The Sun and Moon Page displays data for Sunrise/Sunset, Moonrise/Moonset, and the approximate location of the Sun and Moon on a skyview. The moon phase will display the current visible portion of the moon in a light shade. You may display this information for your current location or you can use the Map or Points Menu to select a location. To display the location options, press ENTER with Location field highlighted.
Hunt and Fish — The Hunt and Fish Page displays data for Good and Best times for hunting and fishing at the selected location. There is also a Rating (excellent, good, normal, poor) displayed, that will reflect the productivity of the day. You may display this information for your current location or you can use the Map or Points Menu to select a location. To display the location options, press ENTER with Location field highlighted.
Setup Menu — ‘General’ Tab The ‘General’ Tab contains settings for the Receiver Mode, WAAS, Backlight Time Out, and Beeper. To change a setting, highlight the field then press ENTER. Make your selection then press ENTER to activate the selection. Mode — The Mode selections are ‘Normal’, ‘Battery Saver’ and ‘Simulator’. ‘Normal’ — This is the default mode set from the factory. Use this setting for best performance.
‘Backlight Timeout’ — Sets the time that the Backlight will remain on once activated. The options are ‘Stays On’, ‘15 Seconds’, ‘30 Seconds’, ‘1 Minute’ and ‘2 Minutes’. ‘Beeper’ — This setting determines when the Beeper is used. The options are ‘Key and Message’, ‘Message Only’, and ‘Off’. Setup Menu — ‘Time’ Tab Getting Reference Started Main Menu Time Tab The ‘Time’ Tab contains settings for Time Format, Time Zone, Daylight Savings Time, Current Date, and Current Time.
Setup Menu — ‘Units’ Tab The ‘Units’ Tab contains settings for Elevation, Depth, Distance and Speed, Temperature, Direction Display, and Speed Filter. These settings are used in related fields throughout the unit. ‘Elevation’ — Can be set to show in ‘Feet’ or ‘Meters’. Getting Reference Started Main Menu Units & Location Tabs hddd.ddddd° hddd°.mm.mmm’ hddd°.mm’ss.
‘Map Datum’ — Datums are used to describe geographic positions for survey- ing, mapping, and navigation and are not actual maps built in the unit. Although there are over 100 datums available to choose from, you should only need to change the Map Datum if you using a chart or paper map that specifies a different datum in the legend. See Appendix D for a list of Map Datums. F WARNING: Selecting the wrong map datum can result in substantial position errors.
Setup Menu — ‘Alarms’ Tab The ‘Alarms’ Tab contains settings for Anchor Drag, Approach and Arrival, Off Course, Shallow Water, and Deep Water. These settings will determine if, and when a warning beep is sounded and/or a message is displayed. Getting Reference Started Main Menu Alarms Tab ‘Anchor Drag’ — The Anchor Drag Alarm will alert you when the boat has drifted more than a distance set by the user. The alarm can be turned ‘On’ or ‘Off’.
Setup Menu — ‘Interface’ Tab The Interface Tab contains one field, ‘Serial Data Format’. This field contains eight settings that allow the GPS 76 to communicate with computer software and other electronic devices. • GARMIN — Allows the GPS 76 to communicate with GARMIN software and other GARMIN GPS units. • GARMIN DGPS — Allows the GPS 76 to communicate with GARMIN Differential Correction devices.
Physical Specifications Size: Weight: Display: Getting Appendix Started A Specifications Case: Temp. Range: 1.2” x 2.7” x 6.2” (3.0cm x 6.9cm x 15.75cm) 7.5 oz (.21kg) 2.9" diagonal (6.
Connecting the Power/Data The power/data cable connects the GPS 76 to a 8-35 volt DC system and provides interface capabilities for connecting external devices. The color code in the diagram below indicates the appropriate harness connections. Replacement fuse is a AGC/3AG - 2.0 Amp fuse.
The chart below gives an approximate UTC (Universal Time Coordinate) time offset for the various longitudinal zones. Check with local charts for more detailed information. If you are in daylight savings time, add one hour to the offset. Getting Appendix Started C Time Offsets Longitudinal Zone Offset W180.0º to W172.5º -12 Longitudinal Zone E007.5º to E022.5º Offset +1 W172.5º to W157.5º -11 E022.5º to E037.5º +2 W157.5º to W142.5º -10 E037.5º to E052.5º +3 W142.5º to W127.5º -9 E052.
Adindan Afgooye AIN EL ABD ‘70 Anna 1 Ast ‘65 ARC 1950 Ascnsn Isld ‘58 Astro B4 Sorol Astro Bcn “E” Astro Dos 71/4 Astr Stn ‘52 Aus Geod ‘66 Aus Geod ‘84 Austria Bellevue (IGN) Bermuda 1957 Bogata Observ Campo Inchspe Canton Ast ‘66 Cape Cape Canavrl Carthage CH-1903 Chatham 1971 Chua Astro Corrego Alegr Djakarta Dos 1968 Dutch Easter Isld 67 European 1950 European 1979 Finland Hayfrd Gandajika Base 190-00229-00.
Oman Ord Srvy GB Pico De Las Nv Potsdam Ptcairn Ast ‘67 Prov S Am ‘56 Getting Appendix Started D Map Datums Minna NAD27 Alaska NAD27 Bahamas NAD27 Canada NAD27 Canal Zone NAD27 Caribbn NAD27 Central NAD27 CONUS NAD27 Cuba NAD27 Grnland NAD27 Mexico NAD27 San Sal NAD83 Nhrwn Masirah Nhrwn Saudi A Nhrwn United A Naparima BWI Obsrvtorio ‘66 Old Egyptian Old Hawaiian Minna- Nigeria North American 1927- Alaska North American 1927- Bahamas North American 1927- Canada and Newfoundland North Am.
Avg Speed— The average of all second-by-second speed readings since last reset. Bearing (BRG)— The compass direction from your current location to a destination. Course— The desired course between the active ‘from’ and ‘to’ waypoints. Getting Appendix Started E Distance (Dist)— The ‘great circle’ distance from current location to a destination. Dist to Dest— The ‘great circle’ distance from current location to a GOTO destina- Navigation Terms tion, or the final waypoint in a route.
Odometer— A running tally of distance travelled, based upon the distance between second-by-second position readings. Off Course— The distance you are off a desired course in either direction, left or right. Also referred to as ‘cross-track error’ or ‘course error’. Speed— The current velocity at which you are travelling, relative to a ground position. Also referred to as ‘ground speed’. Time To— The estimated time required to reach a GOTO destination, or the next waypoint in a route.
Approaching Turn — is displayed when you are nearing a turn in a route. Arriving at Destination — is displayed when you are nearing your destination. Batteries Low — when displayed you have less than 10 minutes of battery left. Getting Appendix Started F Cannot display all found, use city or postal code — The unit found too many items to display. Narrow the search using the city or postal code. Messages Deep Water — The water is deeper than the amount set in the Deep Water Alarm.
Shallow Water — The water is shallower than the amount set in the Shallow Water Alarm. Track Already Exists — A saved track with the same name already exists. Getting Appendix Started F Track Memory Full — No more track data can be stored without deleting old data. Track Log Full — Indicates the track log is full and track recording has been turned Messages off. To be able to record more track points you will need to clear the track log and turn track recording on.
Loran TD System LORAN C is a radio navigation aid operated and maintained in the United States by the United States Coast Guard. The name LORAN is an acronym for “LOng RAnge Navigation”. The LORAN system covers the entire United States and the U.S. Coastal Confluence Zone. From the perspective of a mariner, the system is used for ocean and coastal navigation. It can be used as a supplemental system for harbor and harbor approach navigation, and it is used for inland navigation by recreational vehicles.
The LORAN Position Format field is located under the Units tab in the Main Menu. The ‘LORAN TD Setup’ window contains the fields to select the Loran GRI-Chain Number, Primary and Secondary Stations, and TD Offsets. Getting Appendix Started G To setup Loran TD from the Main Menu: 1. Using the ROCKER, highlight the “Location Format” field on the ‘Location Tab” and press ENTER. Loran TD 2. Highlight ‘Loran TD’, press ENTER. 3.
Standard Accessories Owner’s Manual Quick Reference Guide Lanyard Provides convenient method for carrying the GPS 76. Optional Accessories Getting Appendix Started H Accessories Automotive Mounting Bracket Requires the Marine Mount. This kit includes the mounting base, temporary and permanent adhesive pads and a new swivel bracket. Marine Mount The bracket can rotate 360° and tilt more than 45° backward or forward. Carrying Case Protects the GPS 76 when not in use.
C Getting Appendix Started I Index A Accuracy .................................................................... 23 Accuracy Circle .......................................................... 31 Active Route Page........................................... 11, 34, 47 Active Route Page Options ......................................... 43 Alarms...................................................... 47, 51, 56, 65 Anchor Drag Alarm ..............................................
E Editing Waypoints.......................................... 14, 15, 41 ENTER Key ................................................................ 10 ETA (Estimated Time of Arrival)................................. 63 Getting Appendix Started I Index F Features........................................................................ 4 Follow Track (TracBack)............................................. 38 Full Screen Map ......................................................... 26 G Go To Waypoint .......
Nearest Tide Station ........................................... 48 Nearest Waypoint List .........................................39 NMEA Output Formats .................................57, 59 North Reference ............................................54, 55 Appendix I Getting Started Index Map Configuration ................................................26-31 Map Datums..............................................54, 55, 61-62 Map Page.................................................
R Receiver Status .............................................. 23-24 Registration ...........................................................1 Reviewing Waypoints ..........................................39 ROCKER Key ......................................................10 Routes Page .........................................................43 Routes ........................................................... 43-47 Routes- Activating ...............................................43 Routes- Copying.....
U Units Setting........................................................54 User Datum.........................................................54 Getting Appendix Started I Index Time, Daylight Savings ........................................53 TracBack..............................................................38 Track Log- Clearing .......................................19, 37 Track Log- Deleting .............................................37 Track Log- Displaying........................................
LIMITED WARRANTY GARMIN Corporation warrants this product to be free from defects in materials and manufacture for one year from the date of purchase. GARMIN will, at its sole option, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor. The customer is, however, responsible for any transportation costs. This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs.
© 2001 GARMIN Corporation GARMIN International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. GARMIN (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ, U.K. GARMIN Corporation No. 68, Jangshu 2nd Road., Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00229-00 Rev. B covers.