Owner's Manual
Sonar Tab
Use the Sonar tab to set up and congure sonar. See the “Setting
Up and Using Sonar” section beginning on page 89 for more
information about Sonar setup options.
NOTE: You must have a GSD 20 or GSD 21 Sounder Module
connected to your GPSMAP 276C to use sonar.
Main Menu—Sonar Tab
Alarms Tab
Use the Alarms tab to dene alarm settings. When an alarm goes off,
the alarm message appears on the GPSMAP 276C and the unit emits
ve (5) beeps.
Main Menu—Alarms tab
To set an alarm:
1. Highlight the Alarms tab on the Main Menu.
2. Select the alarm to set, and press ENTER.
3. Change the setting to On, and press ENTER. If necessary,
highlight the next eld to the right, and press ENTER. Enter
the settings you want.
4. Press ENTER to nish.
70 GPSMAP 276C Owner’s Manual
MAIn Menu > sonAr tAb And AlArMs tAb