GPS Receiver Owner's Manual
Table Of Contents
- Introduction
- Getting Started
- Using Charts
- Using the Navigation Chart
- Changing the Navigation Chart Settings
- Using the Split Navigation Chart
- Using Perspective 3D
- Using Mariner’s Eye 3D
- Using Fish Eye 3D
- Using Fishing Charts
- Enabling High Resolution Satellite Imagery
- Viewing Aerial Photos
- Viewing Current-station Information
- Detailed Road and POI Data
- Using Automatic Guidance
- Using the Chart/Sonar Screen
- Where To?
- Viewing Information
- Configuring the Chartplotter
- Using Sonar
- Using Digital Selective Calling (DSC)
- Using XM WX Weather and Audio
- Appendix
- Index
34 GPSMAP 400/500 Series Owner’s Manual
Viewing Information
Select Change Date > Manual to view current-station
information for a different date.
Select Show Report to view the Current Prediction Report for
the selected station.
NOTE: You can select both tide-station and current-station
information directly from the Navigation chart.
Viewing User Data
To view user data, from the Home screen, select Information >
User Data.
Waypoints
—view a list of all saved waypoints (page 15).
Routes—view a list of saved routes (page 26).
Tracks—view a list of saved tracks (page 27).
Data Transfer
—transfer waypoints, routes, and tracks to and from
an SD card or network.
Clear User Data
—erase all user waypoints, routes, and tracks.
To copy or merge MapSource data to your chartplotter:
1. Insert an SD card into your chartplotter to allow it to place a le
on the SD card. This le provides information to MapSource
to format the data. This only needs to be done the rst time
you copy or merge MapSource data to your chartplotter from a
specic SD card.
2. Check your MapSource version on the computer by clicking
Help > About MapSource. If the version is older than 6.12.2,
update to the most-current version by clicking Help > Check for
Software Updates, or check the Garmin Web site at www
.garmin.com.
3. Insert the SD card into an SD card reader that is attached to the
computer.