GPS Receiver Owner's Manual
Table Of Contents
- Introduction
- Getting Started
- Using Charts
- Using the Navigation Chart
- Changing the Navigation Chart Settings
- Using the Split Navigation Chart
- Using Perspective 3D
- Using Mariner’s Eye 3D
- Using Fish Eye 3D
- Using Fishing Charts
- Enabling High Resolution Satellite Imagery
- Viewing Aerial Photos
- Viewing Current-station Information
- Detailed Road and POI Data
- Using Automatic Guidance
- Using the Chart/Sonar Screen
- Where To?
- Viewing Information
- Configuring the Chartplotter
- Using Sonar
- Using Digital Selective Calling (DSC)
- Using XM WX Weather and Audio
- Appendix
- Index
GPSMAP 400/500 Series Owner’s Manual 63
Using XM WX Weather and Audio
Using XM Audio
When a Garmin XM receiver is connected to the audio input of your
boat, you can listen to XM audio channels.
To display the XM audio interface while navigating:
From the any chart except a split screen chart, press Menu >
Data Bars > XM Audio > On.
To select an XM audio channel:
1. From the Home screen, select Congure > XM Audio.
2. Use the Rocker to highlight a channel and preview the song
playing on the channel.
3. Press Select to change to the highlighted channel.
To use the XM audio guide:
From the Home screen, select Congure > XM Audio > MENU.
Save Preset—saves the current XM channel in the Presets list. Press
Delete Preset to remove the current channel from the list. Presets is
displayed as a category in the category list.
Category—selects the category of channels that are displayed in the
XM audio guide.
Channel Entry—allows you to select an XM channel.
Level—adjusts the volume.