GPSMAP 64 ® Quick Start Manual February 2014 190-01702-01_0B Printed in Taiwan
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview 3 Insert the battery pack, observing polarity. 4 Gently press the battery pack into place. 5 Replace the battery cover, and turn the D-ring clockwise. Charging the Battery Pack NOTICE To prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer.
4 5 6 Replace the battery cover, and turn the D-ring clockwise. Hold . Select Setup > System > AA Battery Type. Select Alkaline, Lithium, Traditional NiMH, or Precharged NiMH. Turning On the Device Hold . Acquiring Satellite Signals It may take 30 to 60 seconds to acquire satellite signals. 1 Go outdoors to an open area. 2 If necessary, turn on the device. 3 Wait while the device searches for satellites. A question mark flashes while the device determines your location.
2 Select MENU > Measure Distance. 3 Move the pin to another location on the map. Compass When navigating, points to your destination, regardless of the direction you are moving. When points toward the top of the electronic compass, you are traveling directly toward your destination. If points any other direction, turn until it points toward the top of the compass.
4 Place the memory card with the gold contacts facing down. 5 Close the card holder. 6 Slide the card holder to to lock it. 7 Replace the battery and cover. Attaching the Wrist Strap 1 Insert the loop of the wrist strap through the slot in the device. 2 Thread the other end of the strap through the loop, and pull it tight. Attaching the Carabiner Clip 1 Position the carabiner clip À in the slots on the mounting spine Á of the device. 2 Slide the carabiner clip up until it locks in place.
www.garmin.
