Installation Instructions

190-01007-A3 GTN 6XX/7XX AML STC Installation Manual
Rev. 4 Page B-1
Appendix B Installation Guidance and Sample Installations
B.1 Requirements for GTN 6XX/7XX Installations
The GTN 6XX/7XX Navigators are designed to be installed in the mounting rack attached to the back of
the instrument panel. In many cases, the existing “brackets” or “rails” fastened to the face of an
instrument panel can provide adequate means to attach the GTN 6XX/7XX mounting racks and may be
re-used requiring no modifications to the instrument panel.
Use the decision tree presented in Figure B-1 to determine the installation path (including sections to
reference) and requirements for each installation.