Installation Instructions

GTN 6XX/7XX AML STC Installation Manual 190-01007-A3
Page C-6 Rev. 4
C.5 EFIS Displays
Manufacturer Model
Data
Format
Configuration Notes
Avidyne
EXP5000
P/N 700-00006-( )
ARINC 429
IN: Low, EFIS Format 4
OUT: Low, GAMA Format 2
[1]
Honeywell
(Bendix/King)
EFS 40/50
(SG 465)
IN: Low, EFIS Format 2
OUT: Low, GAMA Format 6
[2]
IN: Low, EFIS Format 1
OUT: Low, GAMA Format 1
[3]
Garmin GDU 620
ARINC 429,
RS-232
ARINC 429 Setup
• IN: Low, GDU Format 1
• OUT: High, GAMA Format 1
• SDI: LNAV1 (for GPS 1)
LNAV2 (for GPS 2)
RS-232 Setup
• OUT: MapMX
• For single GDU 620 installations, enable
the Main indicator (Analog) CDI key
(i.e. Main CDI/VDI outputs can be GPS
or VLOC).
• For dual GDU 620 installations, disable
the Main indicator (Analog) CDI key
(i.e. Main CDI/VDI outputs can only be
GPS).
VOR/LOC/GS Setup
ARINC 429 Config
Tx Speed: Low
SDI: VOR/ILS 1 (for NAV 1)
VOR/ILS 2 (for NAV 2)
[1] PFD software P/N 530-00194-( ) or later is required.
[2] SG 465 software 1201 or later is required. Vertical guidance is provided for GPS
approaches.
[3] SG 465 software 1501. Vertical guidance is provided for GPS approaches.
C.6 EHSI
Manufacturer Model Data Format Configuration Notes
Sandel
SN 3308 Analog/ARINC 429
GAMA Format 3,
low speed
GPS lateral and vertical
guidance is provided using the
analog interface.
SN3500/4500 ARINC 429
GAMA Format 3,
low speed
Vertical guidance is provided
for GPS approaches.
Software version 3.06 or later
is required for SN3500.