Installation Instructions

GTN 6XX/7XX AML STC Installation Manual 190-01007-A3
Page C-8 Rev. 4
C.8 Transponder
Manufacturer Model
Data
Format
Configuration Notes/Configuration
Garmin
GTX 32
RS-232
GTX Mode C #1 or #2
GTX software version
2.10 or later
GTX 327
GTN Control of GTX 327:
GTX Mode C #1 or #2
No GTN Control of GTX 327:
Aviation Output 1(output) to send
GPS groundspeed. Altitude
Format 1 (input, optional) to
receive pressure altitude
GTX 328 GTX Mode S #1 or #2
GTX software version
6.11 or later
GTX 33/33D
GTX (Mode S or w/TIS) #1 or #2
GTX 33/33D
with ES
GTX 330/330D GTN Control of GTX 330:
GTX (Mode S or w/TIS) #1 or #2
No GTN control of GTX 330:
Panel GTX w/TIS #1 or #2
No GTN control of GTX 330 and
no TIS: ADS-B
GTX 330/330D
with ES
NOTE
When the GTN is used with a GTX 32, GTX 33, or GTX 33D installed using
STC SA01473SE, then the limitation in STC SA01473SE requiring use of the GNS 480
(CNX 80) is no longer applicable and all configuration and operation functions of the
GNS 480 are replaced by the GTN.
C.9 NAV Indicator
Manufacturer Model
Data
Format
Notes/Configuration
Honeywell
(Bendix/King)
KI 202A, KI 203, KI 204, KI 206, KI 208/A,
KI 209/A, KI 525A, KPI 552/B, KPI 553/A/B
Analog
Century NSD 360A, NSD 1000
Collins
331A-6P, 331A-9G, PN101 (331A-3F/3G),
IND-351D
[1]
Garmin GI 102/A, GI 106/A
Mid Continent
MD222-402, MD222-406,
MD200-302/303/306/307
Sperry RD 444, RD 550A, RD 650
S-TEC ST 180
[1] Interfacing to the Collins IND-351D, P/N 622-2083-001 is not covered by this STC.