Installation Instructions

190-01007-A3 GTN 6XX/7XX AML STC Installation Manual
Rev. 4 Page C-11
C.13 TAWS Annunciator Panels
An external TAWS annunciator may be required for some installations. See Section 2.4.10.1 for
additional information describing when a TAWS annunciator is required. The following indicators are
suitable for external annunciation.
Manufacturer Part Number Type Notes
Garmin 013-00079-XX Indicator/switch 5VDC, 14VDC, and 28VDC indicators.
Mid-Continent MD41-10XX Indicator/Switch Both 14VDC and 28VDC indicators (refer to
Mid-Continent documentation for availability of
switch functions on each unit)
Vendor Contact Information (provided for convenience only)
Mid-Continent Instrument Co Inc., 9400 E. 34
th Street N., Wichita, KS 67226,
Phone: [phone],
www.mcico.com
C.14 Multifunction Displays
Manufacturer Model Data Format Configuration/Notes
Garmin
MX20
RS-232
Aviation Output 2 format for MX20 version 5.5
and earlier.
Aviation Output 1 format for MX20 version 5.6
and later. (MX20 will not accept GPS altitude
even though it is part of Aviation Output 1
Format).
MapMX format for MX20 version 5.6 or later.
GMX 200
Aviation Output 1 format
MapMX format (preferred)
Avidyne
EX500
(P/N 700-00007-
( )),
EX5000
(P/N 700-00004-
( )
or P/N 700-
00030-( ))
ARINC 429
Use GAMA Format 2, low speed
MFD software P/N 530-00193-( ) or later is
required
Use GAMA Format 2, low speed
MFD software P/N 530-00195-( ) or later is
required
C.15 Interface Adapters
Manufacturer Model Data Format Notes/Configuration
Garmin GAD 42 ARINC 429
GAD Format 1, low speed
Any ARINC 429 output format may be used to
allow configuration of the GAD 42.
C.16 Synchro Heading Sources
Manufacturer Model Data Format Notes/Configuration
Bendix/King KI-525A Analog
Synchro Heading Input = ‘Connected’. Refer to
Section 5.5.1.9.