Installation Instructions

GTN 6XX/7XX AML STC Installation Manual 190-01007-A3
Page E-84 Rev. 4
GTN 6XX/7XX #1
s
P1002
6
7
8
9
ETHERNET IN 1A
ETHERNET OUT 1A
ETHERNET IN 1B
ETHERNET OUT
1B
s
GTN 6XX/7XX #2
P1002
6
7
8
9
ETHERNET IN 1A
ETHERNET OUT 1A
ETHERNET IN 1B
ETHERNET OUT 1B
10 SYSTEM ID PROGRAM*
s
NOTES:
1
. ALL WIRES
24 AWG OR LARGER UNLESS OTHERWISE SPECIFIED.
2
.
GROUND DESIGNATIONS
: SHIELD BLOCK GROUND AIRFRAME GROUND
3. AT GTN 6XX/7XX, CONNECT SHIELD GROUNDS TO THE CONNECTOR BACKSHELL -- THE SHIELD TERMINATION LEADS
MUST BE LESS THAN 3.0".
4. GROUNDING THIS PROGRAM PIN TO THE CONNECTOR BACKSHELL ALLOWS THE SYSTEM TO IDENTIFY ITSELF AS
GTN #2.
5. USE AIRCRAFT GRADE CATEGORY 5
ETHERNET CABLE. THIS INCLUDES THE FOLLOWING
:
s
4
5
P/N
10424 (24 AWG)
392404 (24 AWG)
MANUFACTURER
PIC WIRE AND CABLE
CARLISLEIT
Figure E-37. GTN – GTN Crossfill Interconnect