Installation Instructions
190-01007-A3 GTN 6XX/7XX AML STC Installation Manual
Rev. 4 Page E-87
ALL WIRES
24
AWG OR LARGER UNLESS OTHERWISE SPECIFIED.
GROUND DESIGNATIONS: SHIELD BLOCK GROUND AIRFRAME GROUD
IF ONLY ONE GTN
6XX
/
7XX IS INSTALLED,
CONNECT AS SHOWN FOR GTN #1.
IF A TAWS-EQUIPPED GTN
6XX
/
7XX UNIT IS INSTALLED
, IT
MUST
BE CONNECTED AS GTN
#1 – ONLY TAWS
ANNUNCIATIONS FROM GTN
#1
ARE DISPLAYED ON THE PFD
.
REFER TO GDU 620 INSTALLATION MANUAL FOR COMPLETE PINOUT AND INTERCONNECT INFORMATION.
PIN
-OUTS OF OTHER UNITS SHOWN FOR REFERENCE ONLY
.
USE AIRCRAFT GRADE CATEGORY 5
ETHERNET CABLE.
THIS INCLUDES THE FOLLOWING:
CONNECT SHIELD GROUNDS TO THE CONNECTOR BACKSHELL
--
THE SHIELD LEADS MUST BE LESS THAN
3
.0".
1
2
3
4
5
6
7
NOTES:
P/N
10424 (
24
AWG)
392404
(24
AWG)
MANUFACTURER
PIC WIRE AND CABLE
C
ARLISLE
IT
s
Figure E-39. GTN 6XX/7XX – GDU 620 Interconnect
Sheet 2 of 2