Installation Instructions

190-01007-A3 GTN 6XX/7XX AML STC Installation Manual
Rev. 4 Page J-1
Appendix J Acceptable Hardware
Screws, Non-Structural
Type
Size
6-32 8-32
Pan Head, Low Carbon Steel -
NASM35206
(MS35206)
(AN515)
Pan Head, Brass -
NASM35214
(MS25214)
(AN515B)
Pan Head, Stainless -
MS51957
(AN515C)
Pan Head, Alloy Steel - NAS602
100 Deg Countersunk
NASM24693
(MS24693)
(AN507)
-
100 Deg Countersunk, Alloy
Steel
NAS514P -
Note: Part numbers in parentheses are inactive or cancelled part numbers; these numbers may still be
available and/or referenced on packaging material.
Screws, Structural
Type Size
8-32
Pan Head NASM27039
(MS27039)
(NAS220)
Note: Part numbers in parentheses are inactive or cancelled part numbers; these numbers may still be
available and/or referenced on packaging material.
Washers, Carbon Steel, Cad Plated
Nominal Inside
Diameter
Size
.016 Thick .032 Thick .063 Thick
#6 NAS1149FN616P
(AN960-6L)
NAS1149FN632P
(AN960-6)
-
#8 NAS1149FN816P
(AN960-8L)
NAS1149FN832P
(AN960-8)
-
Note: Part numbers in parentheses are inactive or cancelled part numbers; these numbers may still be
available and/or referenced on packaging material.