Installation Instructions

GTN 6XX/7XX AML STC Installation Manual 190-01007-A3
Page 2-10 Rev. 4
In order to create a GTN Software Loader Card, the drive that you select will be
completely erased.
7. Ensure that the correct drive is selected. Click Next to create the card. Click Next to acknowledge any
warnings that appear. The progress window shown in
Figure 2-4 will appear when the card is being
created.
Figure 2-4. Update Progress Window
8. After the card has been created, the window shown in Figure 2-5 will appear. Click Finish to
complete the update process.
Figure 2-5. Update Completion
9. Eject the card from the card reader (or stop the card reader in Windows). The GTN Software Loader
Card is now ready to use.