Installation Instructions

GTN 6XX/7XX AML STC Installation Manual 190-01007-A3
Page 3-1 Rev. 4
3 INSTALLATION PROCEDURE
3.1 Optional Accessories
3.1.1 GPS/WAAS Antenna Options
For information regarding antenna selection, refer to Section 1.10. Once the antenna type is decided upon,
refer to the information below for detailed parts information for antennas available from Garmin. Contact
the antenna manufacturer directly for non-Garmin antennas.
3.1.1.1 GA 35 Antenna
The GA 35 antenna, Garmin P/N 013-00235-XX, contains one of the items listed in Table 3-1.
Table 3-1. GA 35 Antenna
Item Part Number Qty
GA 35 GPS/WAAS Antenna [1]
013-00235-00 (White)
1 013-00235-01 (Black)
013-00235-02 (Olive Green)
[1] Antenna includes 8-32 UNC-2A x 1.00” Stainless Steel mounting screws (qty 4) and
O-ring (qty 1).
An antenna doubler may also be required. Refer to Section 3.1.2 for additional information.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to the
antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.
3.1.1.2 GA 36 Antenna
The GA 36 antenna, Garmin P/N 013-00244-XX, contains one of the items listed in Table 3-2.
Table 3-2. GA 36 Antenna
Item Part Number Qty
GA 36 GPS/WAAS Antenna [1]
013-00244-00 (White)
1 013-00244-01 (Black)
013-00244-02 (Olive Green)
[1] Antenna includes 8-32 UNC-2A x 1.00” Stainless Steel mounting screws (qty 4) and
O-ring (qty 1).
An antenna doubler may also be required. Refer to Section 3.1.2 for additional information.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to the
antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.