Installation Instructions

GTN 6XX/7XX AML STC Installation Manual 190-01007-A3
Page 5-18 Rev. 4
Selection
GNS
Equivalent
Description Notes
GTX w/TIS+ #1 N/A
Control of GTX 33ES/330ES #1 transponder functions, pressure
altitude data, groundspeed data, and TIS traffic. For use with
GTX software version 7.01 or later for AC 20-165 compliance.
[1] [7]
GTX w/TIS #2 N/A
Control of GTX 33/33ES/330/330ES #2 transponder functions,
pressure altitude data, groundspeed data, and TIS traffic.
[1]
GTX w/TIS+ #2 N/A
Control of GTX 33ES/330ES #2 transponder functions, pressure
altitude data, groundspeed data, and TIS traffic. For use with
software version 7.01 or later for AC 20-165 compliance.
[1] [7]
Panel GTX w/TIS
#1
N/A
Select this format for the GTX 330/330ES transponder #1.This
provides groundspeed, GPS PVT, and pressure altitude
information to the transponder without controlling the
transponder via the GTN.
[1]
Panel GTX
w/TIS+ #1
N/A
Select this format for the GTX 330ES transponder #1.This
provides groundspeed, GPS PVT, and pressure altitude
information to the transponder without controlling the
transponder via the GTN. For use with GTX software version
7.01 or later for AC 20-165 compliance.
[1] [7]
Panel GTX w/TIS
#2
N/A
Select this format for the GTX 330/330ES transponder #2. This
provides groundspeed, GPS PVT, and pressure altitude
information to the transponder without controlling the
transponder via the GTN.
[1]
Panel GTX
w/TIS+ #2
N/A
Select this format for the GTX 330ES transponder #2. This
provides groundspeed, GPS PVT, and pressure altitude
information to the transponder without controlling the
transponder via the GTN. For use with GTX software version
7.01 or later for AC 20-165 compliance.
[1] [7]
Lightning
Detector 1
WX-500
Serial communication to an L-3 Communications WX-500
Stormscope.
[3]
MapMX MapMX
Serial position, GPS altitude, velocity, and navigation data to the
following units:
Garmin MX20 (V5.6 or later), GMX 200
[2]
Traffic Format 7 Ryan TCAD
Select this format for the Ryan TCAD 9900B Series traffic
system.
[3] [7]
Traffic Format 8 Ryan TCAD
Select this format for the Ryan TCAD 9900BX Series traffic
system.
[3] [7]
[1] For more information refer to Section C.7.
[2] For more information refer to Section C.14.
[3] For more information refer to SectionC.10.
[4] For more information refer to Section C.1.
[5] If Auto GNS Crossfill is used, the GTN should be installed as the #1 navigator.
[6] For more information refer to Section C.18.
[7] GTN main software version 3.00 or later.