Installation Instructions

190-01007-A3 GTN 6XX/7XX AML STC Installation Manual
Rev. 4 Page 5-19
5.5.1.3 HSDB Ethernet Configuration Page
The HSDB Ethernet configuration page can be
accessed from the GTN Setup page. To configure each
Ethernet port, touch the key next to the port to
configure it as Connected or Not Connected. See
Figure 5-7. If a Garmin LRU is connected to a specific
Ethernet port, then configure the port as Connected.
If no LRU is connected to the port, configure it as Not
Connected.
Figure 5-7. HSDB Ethernet Port Configuration Page