Installation Instructions

the wind speed, or select a lower number to decrease the

responsiveness.

• Select Auto to automatically adjust the filter settings

based on wind conditions.

Select Done.

Maintenance and Storage

• If needed, use a mild soap solution to clean the wind

transducer, and rinse it with water. Do not use detergents or

high-pressure water.

• It is recommended to remove the wind transducer and store it

in a dry location if it will not be used for long periods of time.

Specifications

Specification Value

Dimensions when mounted (H×L) 345 mm (13.58 in.) × 610 mm

(24 in.)

Weight 260 g (9.17 oz.)

Cable length 25 m (82 ft.)

Operating temperature From -15° to 70°C (5° to 158°F)

Storage temperature From -20° to 80°C (-4° to 176°F)

Water resistance rating IEC 60529 IPX-6 (protected

against heavy seas)

Power usage (wind transducer) 0.33 W

Power usage (wind transducer and

GND 10)

0.85 W

Typical current draw at 12 VDC

(wind transducer)

28 mA

Typical current draw at 12 VDC

(wind transducer and GND 10)

71 mA

Wind speed range From 0.8 to 90 knots (From 0.4

to 50 m/s)

4 Installation Instructions