Airplane Flight Manual Supplement

Hawker Beechcraft 200, 200C, B200, B200C, 190-00915-02 Rev. 8
B200GT and B200CGT King Air FAA APPROVED
Page 84 of 179
TCAS II SYSTEM FAILURE
If the amber status annunciator is displayed on the PFDs and “FAIL”, “NO DATA,” DATA
FAILED,” or “FAILED” is displayed on the traffic map displays, the system will no longer provide traffic
information including Traffic or Resolution Advisories. The crew must visually acquire and maintain
separation from other aircraft.
TCAS II SYSTEM STANDBY
In flight, if the amber status annunciator is displayed on the PFDs and “STANDBY”” is
displayed on the traffic map displays, the system will no longer provide traffic information including
Traffic or Resolution Advisories. The crew must visually acquire and maintain separation from other
aircraft. The TCAS should be placed into TA/RA or TA ONLY mode as appropriate. If the TCAS is
in Standby Mode while on the ground, it will be annunciated with a white annunciator.
To Manually Place the TCAS II into TA/RA or TA ONLY Mode:
1. On Either PFD, XPDR/TFC Softkey ....................................................................................... PRESS
2. MODE Softkey ....................................................................................................................... PRESS
3. TA ONLY or TA/RA Softkey ................................................................................................... PRESS