Pilot's Guide

190-009663-03 Rev. A

Garmin G1000 Pilot’s Guide for the Beechcraft C90A/GT/GTi

111

AUDIO PANEL AND CNS

AUTO-TUNING THE COM FREQUENCY

Tune COM frequencies from the following:

• Nearest Airports Window (PFD)

• WPT – Airport Information Page

• NRST – Nearest Airports Page

• NRST – Nearest Frequencies Page (ARTCC, FSS, WX)

• NRST – Nearest Airspaces Page

AUTO-TUNING FROM THE PFD

Tune COM frequencies for the nearest airports from the Nearest Airports Window on the PFD. When the

desired frequency is entered, it becomes a standby frequency. Pressing the

Frequency Transfer

Key places

this frequency into the COM Active Frequency Field.

Auto-tuning a COM frequency for a nearby airport from the PFD:

1) Select the

NRST

Softkey on the PFD to open the Nearest Airports Window. A list of 25 nearest airport identiﬁers

and COM frequencies is displayed.

2) Turn the

FMS

Knob to scroll through the list and highlight the desired COM frequency.

3) Press the

ENT

Key to load the COM frequency into the COM Standby Frequency Field of the selected COM

radio.

4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.

Figure 4-8 Nearest Airports Window (PFD)

Select the

NRST

Softkey to Open

the Nearest

Airports Window