Instruction Manual

G1000 / GFC 700 System Maintenance Manual - 300/B300 Series King Air Page 4-5
190-00716-01 Revision 3
Item Description/Procedure
Manual
Section No.
Interval
GFC700 Periodic
Check
Verify proper operation of the GFC700 by
performing the following:
Pre-Flight Test
AFCS Switch Checks
Autopilot Operation Checks
Autopilot Clutch Overpower Check
8.2.1,
8.2.2,
8.2.5
8.2.3
Phase 2 and 4
TAWS Functional
Check
Periodic TAWS function check 7.17 Phase 4
GDU 1040A PFD
(Qty 2)
Removal & Replacement 6.1 On Condition
GDU 1500 MFD Removal & Replacement 6.1 On Condition
GMA 1347D (Qty 2)
Removal & Replacement 6.2 On Condition
GMA 1347D Test 7.2.1 Phase 2 and 4
Landing Gear Aural Alert Check 7.2.2 Phase 2 and 4
XM Audio Suppression Check 7.2.3 Phase 2 and 4
GIA 63W IAU (Qty 2)
Removal & Replacement
6.3
On Condition
GEA 71 EAU (Qty 2) 6.4
GTX 33( )
Transponder (Qty 2)
Removal & Replacement 6.5 On Condition
Special Inspection - Perform GTX 33( ) test. 7.5.2 24 Calendar Months
GDC 7400 (Qty 2)
Removal & Replacement 6.6 On Condition
Special Inspection – Perform Air Data Test. 7.6.1 24 Calendar Months
RVSM checks
Special inspection – for RVSM compliant
aircraft only
NOTE:
These checks required for initial RVSM
compliance.
These checks also required when:
• a static port is removed/installed
• the RVSM critical region is repaired
or painted
7.25
24 Calendar Months,
On Condition
(see note)
GRS 77 AHRS
(Qty 2)
Removal & Replacement 6.8
On Condition
Magnetic variation database update 4.6
GMU 44
Magnetometer (Qty 2)
Removal & Replacement
6.9
GDL 69A 6.10
GWX 68 6.15
GMC 710 6.14
GCU 477 6.13
GTS 8XX Traffic Unit 6.31
GPA 65 PA/LNA Unit 6.32
GDL 59 Wi-Fi
Datalink
6.34