Pilot's Guide

190-00663-02 Rev. B
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT/GTi
353
HAZARD AVOIDANCE
3) Turn the small FMS Knob to choose between ‘CELL’ and ‘STRIKE’ options.
4) When an item is selected, press the ENT Key.
If headinginputis lost, strikes and/or cells mustbecleared manually after theexecutionof each turn
(Figure6-79).Thisistoensurethatthestrikeand/orcellpositionsaredepictedaccuratelyinrelationtothe
nose of the aircraft.
Manually clearing Stormscope data (on the Stormscope Page):
1) Select the Stormscope Page.
2) Press the MENU Key.
3) Select ‘Clear Lightning Data’ (Figure 6-79).
4) Press the ENT Key.
Or:
1) Select the Stormscope Page.
2) Select the CLEAR Softkey.
Figure 6-79 Navigation Map Page Options Menu
Changing the viewing mode between 360˚ and 120˚:
1) Select the Stormscope Page.
2) Press the VIEW Softkey. The 360 and ARC softkeys are displayed.
3) Press the 360 Softkey to display a 360˚ viewing area or select the ARC Softkey to display a 120˚ viewing area.
4) Press the BACK Softkey to return to the Stormscope Page.
Or:
1) Select the Stormscope Page.
2) Press the MENU Key.
3) Turn the small FMS Knob to choose between ‘View Arc’ and ‘View 360˚ options.
4) When an item is selected, press the ENT Key.