System Maintenance Manual

G1000/GFC700 System Maintenance Manual – C90A/C90GT/C90GTi King Air Page 3-39
190-00682-01 Revision F
3.9.4.6.2 WX-500 Stormscope Configuration Load Confirmation.
1. With PFD 1 in Configuration Mode, use the PFD 1 large FMS knob to select OTHER and the
Stormscope configuration page.
StormScope Configuration Page (Reference Only)
2. Activate the cursor and highlight the DATA field. Use the small FMS knob to select ‘Config’
and press the ENT key on the MFD.
3. Verify that the DATA window shows the following:
Hdg: None: J3-1 Jumper
J3-2 Jumper
Hdg Valid Flag No Flag
Flag Sense +invld
J3-4 Open
Hdg Value <aircraft heading>
Inhibit Line Off
Antenna Mount Bottom
J3-3 Open
4. Deactivate the cursor.
NOTE
The DATA window is only updated once every five seconds.